"So I guess the correct sequence would be to press TUNE on the KAT500 and then
push TUNE on the K3 and the KPA500 would not KEY. Correct? Why not have pushing
TUNE on the KAT500 initiate the whole sequence...unkey the KPA, start the TUNE
on the K3 and tune?"
That's may not be as perfect a
That inhibit is what I was always nervous about. I always put the KPA500 on
standby and then push TUNE on the K3 and then push TUNE on the KAT500.
Otherwise it's kind of scary...pushing TUNE first on the K3 puts high power
out on the KPA500. I guess if I pushed TUNE then on the KAT500, the KPA500
;
> Buzz
>
> -Original Message-
> From: Dick Dievendorff mailto:d...@elecraft.com>>
> Sent: Sunday, May 30, 2021 12:08 PM
> To: James Beitchman <mailto:jbeitch...@jgbconsult.com>>
> Cc: Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net>
>
On 30/05/2021 19:42, elecraft-requ...@mailman.qth.net wrote:
The problem could be solved with a toggle switch in the shack opening the PTT
line, but not for remote. Thus my question of whether it is possible to get
RF from the K3 w/o activating PTT.
I wonder if the DIGOUT1 output of the
: elecraft-boun...@mailman.qth.net Namens
James Beitchman
Verzonden: zondag 30 mei 2021 18:35
Aan: 'Dick Dievendorff'
CC: Elecraft@mailman.qth.net
Onderwerp: Re: [Elecraft] Can the K3 make power without activating Key Out?
Thanks, Dick,
But here is the real issue, not reported in my post.
My antenna
-
From: Dick Dievendorff
Sent: Sunday, May 30, 2021 12:08 PM
To: James Beitchman
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Can the K3 make power without activating Key Out?
Buzz: Our KAT500 and KPA1500 antenna tuners interrupt the key line with a relay
for ATU tuning (which is done
Buzz: Our KAT500 and KPA1500 antenna tuners interrupt the key line with a relay
for ATU tuning (which is done at exciter power, as we can’t hot switch ATU
relays at QRO and amps don’t deal well with the SWR swings encountered during
ATU tune). The K3, like most exciters, does pull down the KEY
Just saw your QRZ page. It appears that you are operating your
station remotely, so my simple suggestion obviously won't work. Hope
someone else may have the right suggestion for you!
Ron WA2EIO
On 5/30/2021 10:30 AM, James Beitchman wrote:
I think the answer is no, but I'll ask
If I am understanding correctly, you want to bypass the amp and use
low power from the K3 into the tuner in order to tune the antenna.
Does the amp have a 'bypass' switch on it? If not, then you can put a
switch in the keying line to open it when you want to bypass the amp.
If you are
I think the answer is no, but I'll ask this question anyway.
The station configuration is K3 followed by amp followed by automatic
antenna coupler, where the Key Out line of the K3 is used to switch the amp
inline.
I would like to generate RF from the K3 without switching the amp inline
10 matches
Mail list logo