I'm not at home to check, but isn't there a CONFIG: setting required for
that? 73, Guy K2AV
On Saturday, June 6, 2015, Jim Sheldon w...@cox.net wrote:
I have exactly the same problem here. My K3 doesn't recognize the KXV3B.
I triple checked the install. Funny, but the RX-IN works and my
:37:18 PM
Subject: Re: [Elecraft] ERR XV3
Go to Config, KXV3, tap 9
Exit the menu.
73,
Bob, N6CM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
To: Jim Sheldon w...@cox.net
Cc: Sebastian w...@bellsouth.net; Elecraft elecraft@mailman.qth.net
Sent: 6/6/2015 3:41:40 PM
Subject: Re: [Elecraft] ERR XV3
I'm not at home to check, but isn't there a CONFIG: setting required for
that? 73, Guy K2AV
On Saturday, June 6, 2015, Jim Sheldon
Subject: Re: [Elecraft] ERR XV3
Go to Config, KXV3, tap 9
Exit the menu.
73,
Bob, N6CM
On Sat, Jun 6, 2015 at 2:26 PM, Jim Sheldon w...@cox.net wrote:
Yes there is, but it doesn't work because the K3 (not K3S) firmware is
not recognizing the KXV3B module or at least not recognizing some
parts
Subject: Re: [Elecraft] ERR XV3
I'm not at home to check, but isn't there a CONFIG: setting required
for that? 73, Guy K2AV
On Saturday, June 6, 2015, Jim Sheldon w...@cox.net wrote:
I have exactly the same problem here. My K3 doesn't recognize the
KXV3B. I triple checked the install
I received today the new KXV3B module, and installed it in my K3 serial number
05864, using K3 Utility Revision 1.15.5.1.
I also updated my K3 firmware, to revision 05.26. I completed the Milliwatt TX
Gain Calibration (since I also have an XV222). For good measure, I also
completed both the
I have exactly the same problem here. My K3 doesn't recognize the KXV3B. I
triple checked the install. Funny, but the RX-IN works and my original VLF mod
works fine and it depends on the XV3's RX-IN jack so contrary to my thinking I
have a defective module, I suspect a problem in FW beta
7 matches
Mail list logo
