Mine took more than a couple of turns [9 to be exact] of the supplied
flat cable right up next to the radio connector.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 7/17/2020 1:43 PM, Keith Trinity WE6R wrote:
I use about a 5 foot nice flexible old computer mouse cord.
Goes from
ovided through this cable.
>
> I use a very standard USB A to B cable.
>
> 73 de Dick, K6KR
>
> -Original Message-
> From: Nr4c
> Sent: Friday, July 17, 2020 01:43
> To: Dick Dievendorff
> Cc: Eric Norris ; elecraft@mailman qth. net
>
> Subject: Re:
I use about a 5 foot nice flexible old computer mouse cord.
Goes from the RJ 6-pin "Radio" jack on K-POD to bottom of K3 Front Panel.
I did NOT connect a wire to the one unused pin on either end, so you
only need 5 wires.
It works but I occasionally get RF into it on 80m as my antenna radiates
Oh sorry. I was still thinking of usb. The aux out can control an external
device like an antenna switch...with a macro. Page 12
Jack BMW Motorcycles
Chuck KE9UW
c-haw...@illinois.edu
Sent from my iPad
> On Jul 17, 2020, at 2:37 PM, hawley, charles j jr
> wrote:
>
> Computer hookup for
Computer hookup for upgrades
Chuck Jack Hawley
KE9UW
Sent from my iPhone, cjack
> On Jul 17, 2020, at 1:20 PM, Fred Jensen wrote:
>
> Just curious and a bit too busy to go look it up right now, what is the AUX
> jack for on the back of my K-POD?
>
> 73,
> Fred ["Skip"] K6DGW
> Sparks NV
Just curious and a bit too busy to go look it up right now, what is the
AUX jack for on the back of my K-POD?
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 7/17/2020 7:08 AM, Dick Dievendorff wrote:
My K-Pod, an early one, has a rear-panel USB-B connector labeled "USB", used to
Yes, an RJ-12 cable for a K3, a USB cable for a K4.
73 de Dick, K6KR
From: hawley, charles j jr
Sent: Friday, July 17, 2020 07:23
To: Dick Dievendorff ; Eric Norris
Cc: elecraft@mailman qth. net
Subject: Re: [Elecraft] K-POD Coiled Cord?
Oh...not the same as the K3 6 pin
: elecraft@mailman qth. net
Subject: Re: [Elecraft] K-POD Coiled Cord?
It’s a standard USB-A to USB-B cable from K4 to K-Pod. I’m not sure about
coiled...
73 de Dick, K6KR
> On Jul 16, 2020, at 19:50, Eric Norris wrote:
>
> Has anyone found a high-quality coiled cord to replace the K-
r4c
Sent: Friday, July 17, 2020 01:43
To: Dick Dievendorff
Cc: Eric Norris ; elecraft@mailman qth. net
Subject: Re: [Elecraft] K-POD Coiled Cord?
It will fit our existing K-Pods??
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 11:56 PM, Dick Dievendorff wrote:
>
> The
It will fit our existing K-Pods??
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 11:56 PM, Dick Dievendorff wrote:
>
> The K4 uses a USB cable to the K-Pod rather than the telephone like cable
> used with K3. There are USB-A jacks on K4 front and back, not underneath
> like the
The K4 uses a USB cable to the K-Pod rather than the telephone like cable used
with K3. There are USB-A jacks on K4 front and back, not underneath like the
K3.
73 de Dick, K6KR
> On Jul 16, 2020, at 20:41, Eric Norris
> Sorry, I mean not the USB cord, but the telephone-cable-like cord that
Sorry, I mean not the USB cord, but the telephone-cable-like cord that goes
under the right front on the K3, and I assume K4.
73 Eric WD6DBM
On Thu, Jul 16, 2020, 8:00 PM Dick Dievendorff wrote:
> It’s a standard USB-A to USB-B cable from K4 to K-Pod. I’m not sure about
> coiled...
>
> 73 de
Field Testers!
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 11:27 PM, Wes wrote:
>
> Who has a K4 to hook it to?
>
> Wes N7WS
>
>> On 7/16/2020 7:47 PM, Eric Norris wrote:
>> Has anyone found a high-quality coiled cord to replace the K-POD to K4
>> cord? Is there a length/type
Who has a K4 to hook it to?
Wes N7WS
On 7/16/2020 7:47 PM, Eric Norris wrote:
Has anyone found a high-quality coiled cord to replace the K-POD to K4
cord? Is there a length/type restriction?
73 Eric WD6DBM
__
Elecraft mailing
It’s a standard USB-A to USB-B cable from K4 to K-Pod. I’m not sure about
coiled...
73 de Dick, K6KR
> On Jul 16, 2020, at 19:50, Eric Norris wrote:
>
> Has anyone found a high-quality coiled cord to replace the K-POD to K4
> cord? Is there a length/type restriction?
>
> 73 Eric WD6DBM
>
Has anyone found a high-quality coiled cord to replace the K-POD to K4
cord? Is there a length/type restriction?
73 Eric WD6DBM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
16 matches
Mail list logo