Re: [Elecraft] K-POD labels

Thanks for that infor, Eric. Won't bother with P-Touch for that. 73, Bill K9YEQ https://wrj-tech.com/ -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Eric Rosenberg Sent: Thursday, August 30, 2018 8:39 PM To: elecraft@mailman net Subject: Re: [Elecraft] K-POD

Re: [Elecraft] K-POD labels

Brother P-Touch labels fit between the K-POD function buttons. The best is TZ-211, 6 mm (1/4"). The next larger size, TZ-221, 9mm, (3/8") is just a hair too tight for me. Both are black print over a white background (which covers the F Key label on the K-POD. There are lots of choices of both

Re: [Elecraft] K-POD labels

Chuck, this solution is in line with my first opinion. In the past I used on a home made superkeyer III a transparent adhesive sheet that I printed with a laser printer, with black characters, with great result. Here the problem is the black face of KPOD. It should be a clear and not

Re: [Elecraft] K-POD labels

Mike, where is available to buy this thin magnetic strip? Thanks Ian IK4EWX -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] K-POD labels

Thanks Fred. I will try this way. 73, Ian IK4EWX -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] K-POD labels

Thanks Dwight. I thought to use a single adesive sheet but your solution is sure easier. 73, Ian IK4EWX -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] K-POD labels

I use a 3 by 5 card which just fits under the Pod. I draw a grid of 4 squares with ink on each side that sticks out from under the Pod and pencil in the commands. Chuck KE9UW Sent from my iPhone, cjack > On Aug 28, 2018, at 4:34 PM, VE3WDM wrote: > > I have used the P-touch labels but stick

Re: [Elecraft] K-POD labels

@mailman.qth.net Subject: Re: [Elecraft] K-POD labels I have used the P-touch labels but stick them on a pre-cut magnetic strip this way you can have add or remove them from the K-pod. The labels are held in place by the magnet. This way you can have a set for contesting, QSO and DXpeditions. https

Re: [Elecraft] K-POD labels

I have used the P-touch labels but stick them on a pre-cut magnetic strip this way you can have add or remove them from the K-pod. The labels are held in place by the magnet. This way you can have a set for contesting, QSO and DXpeditions.

Re: [Elecraft] K-POD labels

I made my labels on my P-Touch label machine [identical to the Brother machine] that prints on white adhesive tape.  Each button is an individual piece of tape.  At the smallest font, there's room for 2-lines of 3 characters, top is TAP, bottom is HOLD.  KPOD has really changed the way I

Re: [Elecraft] K-POD labels

I used the adhesive backed 12mm wide tape from an old Brother P-Touch on small print which is about 1/8 of an inch. I then cut them down to about 3/16 width by 2-1/2" long. I put one on each side of each row of F keys. It's the same tape I use for labeling all the cables in the shack. 73

[Elecraft] K-POD labels

Somebody has well solved the problem of labeling clearly the F-Keys on the K-POD? How? I am interested to use a clean and clear way of labelling the K-Pod commands. Thanks. Ian - IK4EWX -- Sent from: http://elecraft.365791.n2.nabble.com/