I have complete, original, unassembled, KAT100-2 in the original box
that I never got around to building. If anyone is interested - contact
off list.
Doug -- KJ0F
On 12/21/2018 1:33 PM, David Woolley wrote:
Unfortunately the KAT100-2 doesn't seem to be available any longer,
even though it is
David,
That is true. The problem is that the EC2 enclosure is no longer
available. The supplier is no longer in business.
Fortunately, there is a "cure" (even if it is only temporary - until
Elecraft runs out of the panels).
Elecraft still has some KAT100-2 front and rear panels available,
Unfortunately the KAT100-2 doesn't seem to be available any longer, even
though it is still described on the man page for the tuner.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Brian,
Even though the KAT2 and the KPA100 are present in the "Twins"
configuration, when the K2 MCU detects the presence of the KPA100, the
KAT2 is bypassed and set to connect only to ANT1.
In other words, the KAT2 will not work with the KPA100 present.
If an ATU is required with the KPA100
..unless you build it in the ‘Twins’ configuration. Then you have the KAT2 and
KAT100 both available in the system along with the KPA100. But you need
another EC2 enclosure.
Brian
KB1VBF
Sent from my iPad
> On Dec 19, 2018, at 9:04 PM, Neil Zampella wrote:
>
> Gene ...
>
> if you were
Gene ...
if you were planning to buy a K2 kit, you should do that. It was a
pleasure, and a lot of fun to put together. The KAT2 will not work
with the KPA100 option for the reason Don pointed out also, and Don
correct me if I'm wrong, I'm not sure its rated for more than 20w.
The
Well, proceed as you must Gene, but building and operating a K2 is an
experience in radio like no other. And "Mr. K2" [Don] is always here to
help.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 12/19/2018 2:18 PM, Gene O wrote:
I should have first stated that I do not have any K2
I should have first stated that I do not have any K2 or any amplifiers
or tuners. Just asking questions in anticipation of getting a K2.
Reading manuals and seeing photos of k2s is not as good as seeing the
actual unit.
I am aware that the top of the KPA-100 is a black fined heat sink. I
Gene,
Look at the top of the K2 - does it have a black finned heatsink? If
so, that is the KPA100.
If you have 2 BNC connectors at the ANT1 and ANT2 positions on the upper
rear panel of the K2, then the KAT2 is installed. BUT the KPA100 and
the KAT2 cannot co-exist since they occupy the
For a portable operation:
Can anyone tell me if I have a K2 with the KPA-100 and the KAT2 low
power auto tuner installed can it be operated at say 35 watts. I will
have a battery large enough to supply power. (Will not use this setup at
100W). Will the tuner work OK?
I've been hunting
F8ACF-56 <f8ac...@yahoo.fr>; Elecraft Reflector
<elecraft@mailman.qth.net>
Envoyé le : Jeudi 29 juin 2017 22h05
Objet : Re: [Elecraft] K2 and kpa 100 (2)
Christophe,
Yes, that is OK. Voltages within 10% of the value printed in the manual
are normally OK.
73,
Don W3FPR
On
Christophe,
Yes, that is OK. Voltages within 10% of the value printed in the manual
are normally OK.
73,
Don W3FPR
On 6/29/2017 3:02 PM, Christophe F8ACF-56 via Elecraft wrote:
Hello Don, and all ,
So I arrived on page 26 left column down
When the K2 starts up the K2 says: 12.7 Volt I
Hello Don, and all ,
So I arrived on page 26 left column down
When the K2 starts up the K2 says: 12.7 Volt I 0.32 amp
I think it's okay?
All values appear OK
un single doubt
For U1 pin 27 I have 5.7
For U1 pin 28 I have 5.58
But I think it's OK, okay?
Thank you for your help
Sorry for
mailman.qth.net>
*Envoyé le :* Mardi 27 juin 2017 16h01
*Objet :* Re: [Elecraft] k2 and kpa 100
Christophe,
That is the modification I thought you were referring to.
If your K2 serial number is 3000 or higher, that mod is already
installed, and you do NOT have to do it.
Notice that it refers to
, Christophe
F8ACF-56
De : Don Wilhelm <donw...@embarqmail.com>
À : Christophe F8ACF-56 <f8ac...@yahoo.fr>; Elecraft Reflector
<elecraft@mailman.qth.net>
Envoyé le : Mardi 27 juin 2017 16h01
Objet : Re: [Elecraft] k2 and kpa 100
Christophe,
That is the modifica
Christophe,
That is the modification I thought you were referring to.
If your K2 serial number is 3000 or higher, that mod is already
installed, and you do NOT have to do it.
Notice that it refers to the REV A RF board. Rev B boards are used in
K2s with a serial number of 3000 or more.
Also
F8ACF-56
De : Don Wilhelm <donw...@embarqmail.com>
À : Christophe F8ACF-56 <f8ac...@yahoo.fr>; Elecraft Reflector
<elecraft@mailman.qth.net>
Envoyé le : Lundi 26 juin 2017 21h34
Objet : Re: [Elecraft] k2 and kpa 100
Christophe,
If your K2 serial number is 3000 or gre
Christophe,
If your K2 serial number is 3000 or greater, those modifications do not
have to be done at all, they are already present on the RF Board.
You do need to mount the headers at P3 and P6 and remove pin 4 from the
10 pin header at Control Board P4.
Those changes may be made at any
Good evening to all ,
The K2 modifications to put the KPA 100
Should they be made, before putting the KPA 100?
For the first tests step 2 of the KPA100 with dialogue and assembly in the K2,
well step 3 or we have mounted the transistors of the final
Thank you in advance for your remarks
73 ,
F8ACF-56
De : Ron D'Eau Claire r...@cobi.biz
À : 'Christophe F8ACF-56' f8ac...@yahoo.fr; elecraft@mailman.qth.net
Envoyé le : Samedi 4 mai 2013 22h50
Objet : RE: [Elecraft] K2 and KPA 100
Yes, it's designed to do just that. Furthermore, you can have the KAT2
Christophe,
Changing from the KPA100 to the QRP top cover is a matter of removing 6
screws and removing the 4 cables between the KPA100 and the base K2.
Add the QRP top cover and you are done.
If your need to change from the 100 watt amp to QRP is frequent,
consider mounting the KPA100
Good evening to all,
is there a way to put off the K2 100 kPa for the 10w version for travel and
100W QRP version home
73 , Christophe F8ACF-56
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Christophe -
The easiest way to do this, if you will be changing from one
configuration to the other frequently, is to mount the KPA100 in a
separate EC2 cabinet. I do this with my K2, and it works great. I also
have the KAT100 antenna coupler in the same EC2 box, but you can do this
with
If you do not already have a KPA100, you might look at the very very soon to be
released KXPA100. It designed as an add-on amp for the KX3.
wunder
K6WRU
On May 4, 2013, at 1:13 PM, Jim Wiley wrote:
Christophe -
The easiest way to do this, if you will be changing from one configuration to
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Christophe F8ACF-56
Sent: Saturday, May 04, 2013 12:55 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K2 and KPA 100
Good evening to all,
is there a way to put off the K2 100 kPa for the 10w version for travel and
100W QRP version home
I have for sale a K2 (s/s 3995) and a KPA-100/KAT100 in a separate EC2
case for sale. Base K2 transceiver included all options except for
60-meter module. Has autotuner, DSP, SSB, NB, Battery, etc. Many other
items not listed here. Please contact me off list for complete
information,
Hi All,
I've just spent the day fine tuning my KPA100 - measuring the output power
on each band and trying to improve it. Initially I was getting a HI Current
warning on each of the bands from 160 through to 40 (all into a dummy load),
but not on the rest. In all cases the maximum power I could
Mike,
How are you measuring power out? and how good is your dummy load? (check it
with your antenna analyzer) - that will get the first things out of the way
for us.
The Hi-Cur indication is coming from the base K2 and not the KPA100 - it
indicates that the base K2 has to drive the KPA100 too
28 matches
Mail list logo