Make sure you are using only one PTT method. CAT or VOX but never both. I
prefer CAT as any signal or any noise on the audio line will trip the VOX and
thus hold it in transmit.
Bob, K4TAX
Sent from my iPhone
> On Oct 21, 2018, at 11:04 AM, Bill Frantz wrote:
>
> I indeed had MIC BTN on
I indeed had MIC BTN on, and turned it off. I the KX3 still
didn't go into receive when I pressed the "Halt Tx" button. (MIC
BIAS was already off.)
Another issue I didn't mention before seems to have gotten
worse. Sometimes pressing the "XMIT" button on the KX3 doesn't
take it out of transmit
It is not disabled automatically in Data A mode. I have looked and if I
don’t set it purposefully it will remain at the last setting per band. I
have macros that I use to toggle between voice operation and digital
modes. I set the mic bias and mic btn menu items accordingly.
Happy to proven wr
I think the mic bias is automatically disabled in DATA A mode. But I might be
wrong.
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)
> On Oct 20, 2018, at 4:54 PM, Nr4c wrote:
>
> MIC BIAS should be OFF unless you are using a mic that requires it. Bias has
> NO
Yes, use only method for PTT. Either CAT or VOX, but never both. I
prefer CAT as, for digital operation, I don't have to mess with the VOX
values for my normal SSB operation.
73
Bob, K4TAX
On 10/20/2018 6:52 PM, Nr4c wrote:
Sounds like you have more than one PTT control active. Check
MIC BIAS should be OFF unless you are using a mic that requires it. Bias has NO
other use.
Sent from my iPhone
...nr4c. bill
> On Oct 20, 2018, at 6:35 PM, Robert Albano wrote:
>
> Turning the MIC BTN off fixed the problem. Now Halt Tx stops the KX3 as well.
>
> Should MIC BIAS be off as w
Sounds like you have more than one PTT control active. Check out your interface
and VOX settings.
Sent from my iPhone
...nr4c. bill
> On Oct 20, 2018, at 5:46 PM, rich hurd WC3T wrote:
>
> What is the setting of MIC BTN on the KX3?
>
>> On Sat, Oct 20, 2018 at 17:21 Bill Frantz wrote:
>>
Turning the MIC BTN off fixed the problem. Now Halt Tx stops the KX3 as well.
Should MIC BIAS be off as well?
73 Robert K7RNA
> On 2018 Oct, 20, at 3:26 PM, Robert Albano wrote:
>
> I have the same behavior:
> KX3
> PX3
> SignaLink
> MacBook Pro
> CAT interface
>
>> On 2018 Oct, 20, at 2:21
I have the same behavior:
KX3
PX3
SignaLink
MacBook Pro
CAT interface
> On 2018 Oct, 20, at 2:21 PM, Bill Frantz wrote:
>
> I have noticed an significant difference between the way my K3 and KX3 work
> with wsjt-x. On the K3, the "Halt Tx" button immediately stops transmission
> on the radio.
What is the setting of MIC BTN on the KX3?
On Sat, Oct 20, 2018 at 17:21 Bill Frantz wrote:
> I have noticed an significant difference between the way my K3
> and KX3 work with wsjt-x. On the K3, the "Halt Tx" button
> immediately stops transmission on the radio. With the KX3, the
> radio remain
I have noticed an significant difference between the way my K3
and KX3 work with wsjt-x. On the K3, the "Halt Tx" button
immediately stops transmission on the radio. With the KX3, the
radio remains in transmit mode, although the computer has
stopped sending audio. I have to press the "XMIT" but
11 matches
Mail list logo