Hi Al;
Most likely is the little Sub-In board is off a row of pins.
Or possibly the KXV3 has a missed pin.
Or one of the little black cube chokes (L1,2,&3) on the Sub-In board got
knocked off.
(I assume you have the KXV3B in "nor" and you have tapped 9 while in
that menu to toggle the "B" on.
Hello,
I upgraded my K3 ser# 6360 with a new KXV3B module and now is
doesn't TX or RX. I thought the new module might be defective so I
put the original KX3B back in with the same results. I did a
synthesizer calibration but that didn't help. I get no error
displays. With the new KX3VB
Removing the entire left side panel makes installation of the KXV3B
module even easier.
As an additional hint, bend the pins of the KXV3B connector slightly
toward the front - about 1/16 inch at the tips of the pins is enough.
That will allow you to more easily install the new option.
73,
As others have noted, removing the two screws on the rear of the left panel
makes the installation easier. Especially in order to attach the lock
washer and nut on the bottom corner of the KXV3B module with my XXL
fingers..
Now just waiting for the PTXMON parts that are due to arrive tomorrow so
4 matches
Mail list logo
