And a Mea Culpa from me.
I have a MH2 that I use very infrequently with my K2 and it works well.
When the question was asked, I noted the instructions were different for
the K3 but failed to read them carefully. I should have tried my MH2 on my
K3 before offering advice.
I have only a casual
Gentlemen, thank you very much. One of the nice things about Elecraft is all
the good feedback you get from users!
Mike NJ2OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home:
I am sorry to disagree, but the MH2 will work fine for both the K2 and
K3. They are interchangable. After the repair and configuration of
over 1000 K2s, I am quite familiar with the K2 microphone configuration
for various microphones.
Yes, the K2 mic config header must be jumpered properly
Download the MH2 instructions from Elecraft site and you will see that the
mic has different jumper settings for the K3. I’m not sure if an MH2
configured for K2 will work unchanged with K3. The K2 config in the mic
has a resistor that is not there for K3. At least that is the way I read
it.
Hello Mike
Yes, it works with K3
https://ftp.elecraft.com/MH2/E740030_MH2_Rev_D.pdf
73,
Enviado desde mi iPhone
> El 26 ene. 2021, a la(s) 15:14, NJMike escribió:
>
> Will the MH2 hand mic that was originally for the K2 work with the K3? I
> know there is an MH4 mic now that works with
Mike,
Yes, no problem. It needs bias. The MH4 was the replacement when the
MH2 was no longer able to be sourced by Elecraft.
73,
Don W3FPR
On 1/26/2021 1:13 PM, NJMike wrote:
Will the MH2 hand mic that was originally for the K2 work with the K3? I
know there is an MH4 mic now that works
Will the MH2 hand mic that was originally for the K2 work with the K3? I
know there is an MH4 mic now that works with both rigs.
Thanks,
Mike NJ2OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home:
7 matches
Mail list logo
