That’s for sure. And this is a good one to belong to. :-)
73, Jim / K7TXA
> On Sep 23, 2021, at 4:20 PM, Lou Mecseri wrote:
>
> A "community" is smarter than one individual. Hi.
>
> 73, Lou KE1F
>
> On 9/23/2021 22:11, James Bennett via Elecraft wrote:
>> Bingo! That was it Mike - thanks!
A "community" is smarter than one individual. Hi.
73, Lou KE1F
On 9/23/2021 22:11, James Bennett via Elecraft wrote:
Bingo! That was it Mike - thanks! With as many cables to hook up with the
K-Line (I thought this was wireless radio!) that is one I missed. Hooked up a
short BNC cable and now
Bingo! That was it Mike - thanks! With as many cables to hook up with the
K-Line (I thought this was wireless radio!) that is one I missed. Hooked up a
short BNC cable and now it works.
Thanks again!
Jim Bennett
Eagle, ID
> On Sep 23, 2021, at 3:30 PM, Michael Carter wrote:
>
> Jim,
>
Jim,
Check the BNC cable between the K3 IF Out and the P3. At the P3 end,
make sure it is connected to IF IN.
73,
Don W3FPR
On 9/23/2021 4:48 PM, James Bennett via Elecraft wrote:
Hope someone can help me out on this one. I just moved into a new home,
relocating my station from CA to ID.
Jim,
At the risk of asking the obvious question, did you remember to
connect the coaxial cable from the K3 IF output to the P3 input?
The other data functions are handled by the RS-232 cabling,
but without RF there's nothing to display.
Mike, K8CN
Hope someone can help me out on this one. I just moved into a new home,
relocating my station from CA to ID. Got the K3/P3/KAT500/KPA500 all hooked up.
All was working fine at the previous QTH. Now, the P3 is not showing me any
signals. The “signal level” is below S0. I have an IC-705 that I
6 matches
Mail list logo
