100% normal -- not to worry.
If the entire panel starts to glow, reduce CW speed.
A dull orange seems OK Wayne but smoke from the paddle is hurting my eyes.
73
Gary ZL2iFB
__
Elecraft mailing list
Home:
One other stupid question... In prep for FD I decided to do some TX
tests... I found that the radio starts limiting power output and giving
HI CUR messages around 66 to 68C PA TEMP. I recall Eric stating that
the rig would be fine to 85C. Is this HI CUR message normal at this
range? I'm
Hello Brett,
Your question:
Is it normal for the right side to run quite a bit warmer after installation
of the KRX3.
I did notice the same effect. I asked support and they confirmed it as
something normal. (I didn't expect that increase in heat production as
well).
73's, Evert PA2KW
)
Sent: Friday, June 19, 2009 11:13 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Right side runs warmer after KRX3 install
Hello Brett,
Your question:
Is it normal for the right side to run quite a bit warmer after installation
of the KRX3.
I did notice the same effect. I asked support
Is it normal for the right side to run quite a bit warmer after
installation of the KRX3. I did a quick google search and no nabble
hits came up. I'd assume that the two regulators on the right side are
running warmer because of the greater consumption. I assume that when
the SUB is off that
100% normal -- not to worry.
If the entire panel starts to glow, reduce CW speed.
73,
Wayne
N6KR
On Jun 18, 2009, at 9:40 PM, Brett Howard wrote:
Is it normal for the right side to run quite a bit warmer after
installation of the KRX3. I did a quick google search and no nabble
hits came
6 matches
Mail list logo
