On Mon, 31 Jan 2005 10:33:18 -0800, Ron D'Eau Claire wrote:
Re: Frequency readout. Assuming you aren't in SPLIT mode (in which case you
should see the xmit frequency on the K2 when you transmit), I'd run CAL PLL
and see how it behaves. If the firmware has been changed without doing that,
all
On Wed, 2 Feb 2005 18:02:43 +0100, Tom Arntzen wrote:
If the frequency counter cabel isn't connected to TP1 you will get
the info 232 message.
Thanks. It WAS connected from the counter to TP1.
Jim
___
Elecraft mailing list
Post to:
I bought a k2/100 from someone on this list several months ago, and
shipped to my remote QTH in CA. Just got out here to play with it
last weekend. It works fine on 160, but on 40 (and probably other
bands, haven't had time to check) the tuning knob tunes makes the
frequency readout change but
Jim
From your description, it sounds like you are in SPLIT mode.
Check the manual for directions.
Good luck and 73
Bob N6WG
-- Original message --
I bought a k2/100 from someone on this list several months ago, and
shipped to my remote QTH in CA. Just got out here to
Jim, K9YC, wrote:
I bought a k2/100 from someone on this list several months ago...Just got
out here to play with it
last weekend
Tuning knob is VERY stiff compared to my own K2.
tuning knob tunes makes the frequency readout change but the transmitted
frequency (as observed
on another
5 matches
Mail list logo
