Thank you all for the quick reply and suggestions. Good work as all is well.
The CONFIG.PTT was set to other than OFF-OFF, made the change in settings
ERR-PTT no longer an issue.
Following up on the Notes Guide and will make those changed also as I was
getting the “Unable to creat shared
ERR PTT often means that CONFIG:PTT-KEY in the K3 is set to RTS-something
(or DTR-something), and something in the computer is activating RTS (or
DTR) at the time the radio is powered up.
If this is the cause, a simple solution for this is to set CONFIG:PTT-KEY
to OFF-OFF (or OFF-DTR if you want
R Gilley
I gave used Mac for years and there are lots of folks that do.Go with
Howard’s advice first, if you have not already done so.
Odds are the settings in WSJT-X are not quite right. Check the Rig settings
in WSJTX. You might have a check mark set incorrectly, something like DTR
I am using a Mac Mini M2Pro and use WSJT with my K4D. When you install WSJT-X,
there is a readme file with specific instructions on increasing the default
swap file size. One has to do this using terminal (in the utilities application
folder). Have you completed this step?
73 Howard WX7HS
>
Hi all,
I loaded WSJTX on a IMAC and ran into this issue on my K3: I have receive and
Tx ok but I also have ERR PTT displayed. Pressing any key does not clear this
error and I have no access to power adjust as an example. CAT does go green
but still the error.
I have gone over my WSJTX
5 matches
Mail list logo
