RC,
No muting or disconnecting.
Monty K2DLJ
On Jun 21, 2012, at 10:22 AM, Robert 'RC' Conley wrote:
when you have a receive antenna hooked up and you go into transmit, is the
RX antenna port is MUTED, or is disconnected.
__
RC,
The receiver is muted during transmit - that has nothing to do with a
receive antenna.
I don't know how to mute an antenna, but it is certainly not disconnected.
Locate your RX antenna away from the transmit antennas, and if you hear
the COR being activated (relay clicking noise) take
Thought I hit the reply all button ..
-Original Message-
From: Don Wilhelm
Sent: Friday, June 22, 2012 8:26 AM
To: mikefur...@att.net
Subject: Re: [Elecraft] receive antenna
Mike,
It would be good if you post that to the Elecraft reflector just for
general information.
73,
Don
] On Behalf Of mikefur...@att.net
Sent: 22 June 2012 15:20
To: d...@w3fpr.com; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] receive antenna
Thought I hit the reply all button ..
-Original Message-
From: Don Wilhelm
Sent: Friday, June 22, 2012 8:26 AM
To: mikefur...@att.net
Subject: Re
I've noticed that there is receive antenna with the KPA3. I'm looking at the
10w K3 and I don't see any receive antenna option for it. I'm I missing
something?
Gary, N7HTS
__
Elecraft mailing list
Home:
Gary D Krause wrote:
I've noticed that there is receive antenna with the KPA3. I'm looking at
the
10w K3 and I don't see any receive antenna option for it. I'm I missing
something?
You may be misreading something. The ONLY true receive-only antenna is
available with the KXV3 option
Thanks Bill. I just read through the K3 manual and found the KXV3 module
mentioned. I'm glad to see that option available.
Thanks,
Gary, N7HTS
On Sat, 9 Jul 2011 08:50:08 -0700 (PDT)
Bill W4ZV btipp...@alum.mit.edu wrote:
Gary D Krause wrote:
I've noticed that there is receive
My K3-2266 with internal ATU, I normally switch between 2 Antennas.
Is there a way to use one for xmit and one for rx. I do not have the
external RX input. Now I just select one to xmit and one to rx when I want
to.
I would like to have the option to automatically xmit with a vertical and
Fred Lauricella wrote:
My K3-2266 with internal ATU, I normally switch between 2 Antennas.
Is there a way to use one for xmit and one for rx. I do not have the
external RX input. Now I just select one to xmit and one to rx when I want
to.
I believe you can do what you want by going
Just getting my K3 up and running. I have a K9AY loop and would like to
Have that as the receive antenna each time I change band to 160/80
Is there a way for the radio to remember this activity? Or do
I have to press the rcv antenna switch each time?
Comments appreciated.
BTW a million
Jay Rodaman wrote:
Just getting my K3 up and running. I have a K9AY loop and would like to
Have that as the receive antenna each time I change band to 160/80
Is there a way for the radio to remember this activity? Or do
I have to press the rcv antenna switch each time?
The K3 will
Just getting my K3 up and running. I have a K9AY loop and would like to
Have that as the receive antenna each time I change band to 160/80
Is there a way for the radio to remember this activity? Or do
I have to press the rcv antenna switch each time?
Jay,
I also use a K9AY for Rx
I have a K9AY receive loop to connect to my K3. The K9AY box needs a RCA
phono plug. I'm afraid I don't recognize what the plug is on the KXV3 aux.
antenna board.
Can someone tell me what it is (maybe a BNC)? Does anyone know a source of
a phono to the mystery connector cable? if not,
12:32 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Receive antenna connection
I have a K9AY receive loop to connect to my K3. The K9AY box needs a RCA
phono plug. I'm afraid I don't recognize what the plug is on the KXV3 aux.
antenna board.
Can someone tell me what it is (maybe
It is a BNC Joe.
Willis 'Cookie' Cooke
K5EWJ
--- On Tue, 12/30/08, Joe Hoffman hoffmaninvestme...@adelphia.net wrote:
From: Joe Hoffman hoffmaninvestme...@adelphia.net
Subject: [Elecraft] Receive antenna connection
To: elecraft@mailman.qth.net
Date: Tuesday, December 30, 2008, 12:31 PM
I
15 matches
Mail list logo
