http://electronicsusa.com/mk.html
These look like they are made pretty simple. I have a couple of them,
never used them much because my hands are too big and there is no
weight to them. But it would work fine for most folks. Especially if
velcroed or screwed to a board.
Dave Wilburn
Knowing the penchant for CW that many of you have, I thought I would
ask the following question here.
Does anyone have a design for a very simple iambic key that can be
made with simple materials and hand tools? The kids are starting to
send CW and I am finding they are having a LOT of
Iambic or just paddles? I think single-lever would be easier to home
brew. I envision a hack saw blade plus a couple of bolts for contacts,
all on a wooden base. If you want iambic, that would be more difficult.
How much is the black widow kit? I'm thinking it's like $30 or
something but I
On Apr 24, 2008, at 9:48 AM, Darwin, Keith wrote:
Iambic or just paddles? I think single-lever would be easier to home
brew. I envision a hack saw blade plus a couple of bolts for
contacts,
all on a wooden base. If you want iambic, that would be more
difficult.
Yes, it would. Some
How much is the black widow kit? I'm thinking it's like $30 or
something but I don't recall and haven't done the internet search.
I have never heard of it. I will go look for it.
Never mind. I checked. It's over $60. You can get the Kent paddles as
a kit too, but they are more.
That
: Thursday, April 24, 2008 9:39 AM
Subject: [Elecraft] simple iambic paddle
Knowing the penchant for CW that many of you have, I thought I would
ask the following question here.
Does anyone have a design for a very simple iambic key that can be
made with simple materials and hand tools? The kids
-
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert Tellefsen
Sent: Thursday, April 24, 2008 1:16 PM
To: Brian Lloyd; Elecraft reflector
Subject: Re: [Elecraft] simple iambic paddle
Brian
You could make an extremely simple paddle from a piece
shape the pcbs into large finger pads.
David
G3UNA
- Original Message -
From: Brian Lloyd [EMAIL PROTECTED]
To: Elecraft reflector elecraft@mailman.qth.net
Sent: Thursday, April 24, 2008 5:39 PM
Subject: [Elecraft] simple iambic paddle
Knowing the penchant for CW that many of you have
On Thursday 24 April 2008 12:39:01 pm Brian Lloyd wrote:
Does anyone have a design for a very simple iambic key that can be
made with simple materials and hand tools?
I made one when I built The Ultimate Keyer Mk2 by G3RVM
in the February 1980 issue of Radio Communication.
I used two thin
one link you can check out: http://www.geocities.com/n2uhc/paddles.html
al ve3gam
- Original Message -
From: Ian Stirling [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, April 24, 2008 1:48 PM
Subject: Re: [Elecraft] simple iambic paddle
On Thursday 24 April 2008 12
I should have added how I made the contacts: I filed slots in the side
panel and fitted M4 washers with M3 screws to give me some adjustability in
contact spacing. That made for a rather hard contact, so, you might find a
way of springing the grounding contact and it will be more comfortable.
, 2008 1:49 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] simple iambic paddle
On Thursday 24 April 2008 12:39:01 pm Brian Lloyd wrote:
Does anyone have a design for a very simple iambic key that can be
made with simple materials and hand tools?
I made one when I built The Ultimate
Hi Brian,
Take a look at my website ( www.k9ew.us )for some homebrew key /
paddle ideas. Most were copied or adapted from the designs of others
that I found on the Internet. Look under Projects / Paddles and Keys.
They are very low-tech, and don't require much skill to build. And
they all
13 matches
Mail list logo