k" <ve...@sasktel.net>; "Elecraft@mailman.qth.net"
<Elecraft@mailman.qth.net>
Subject: Re: [Elecraft] K3 RX EQ Settings
Doug,
This is not a question where there is a 'best' setting for everyone - it
all depends.
Your RX EQ settings will have to be customized to your e
Doug,
This is not a question where there is a 'best' setting for everyone - it
all depends.
Your RX EQ settings will have to be customized to your ears and the
listening devices you typically use (headphones, speakers, etc.).
I just leave mine set flat for both SSB and CW. Make it sound
Have a new K3S and need to find the best settings.
What are people using for their SSB and CW RX EQ 8 band settings.
Same for the SSB Lo and Hi cut points.
What seems to be the best NR settings.
Thanks
Doug/VA5DX
"Only the fool sayeth there is no God." - From the movie 'The Miracle of Our
Lady of
Is it possible to write a macro for each of these functions to let one toggle
them on and off? Be very useful to hear the effect if this is possible after
one leaves the menu setup.
Thanks!
__
Elecraft mailing list
Home:
I see where one can program the TX settings using the TE command to use in
a macro. I cannot find a corresponding RE command in the K3 Programmer's
Reference for macro use. Is there no such command? If so, where is it
documented? If not, anyone have an idea as to why? If not, what's the best
work
Wayne,
Oh so quickly the forecast comes true may I eat humble pie regarding the
earlier comments about features. A separate RX EQ for CW and SSB might be
really useful. I listen to CW with a low pitch close to 310 Hz and being
able to further attenuate high frequencies above 800 Hz might
On Mon, 23 Jun 2008 10:20:10 -0400, I wrote:
50 +16
100+16
200+16
400+10
800+9
1600 +1
2400 -6
3200 -6
Ok, that didn't work real well. Or should I say, it worked too well...
I set these up on a noisy, empty band along with my room a/c providing
lots of ambient noise.
I would also like my name added to the list for RX audio equalization for each
mode.
Dave KD1NA
Add my name to that, for future firmware addition.
David
G3UNA
So RX equalization is most useful to those of us who like a wide CW
filter b/w.
Yes, Bud, it would be very nice if the RX eq
On Sun, 22 Jun 2008 10:56:10 -0700, Lyle KK7P wrote:
Don't forget the dual passband CW feature of the K3.
In CW mode, just DUAL PB and adjust the width to the total width you
wish to monitor. Your preferred pitch will be accentuated, but you can
still get band context.
73,
Lyle KK7P
I'm
the RX EQ be saved per mode, that is, one for
SSB and one for CW?
Thanks and 73, Bud N7CW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of n4lq
Sent: Saturday, June 21, 2008 6:44 AM
To: [EMAIL PROTECTED]; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3
Add my name to that, for future firmware addition.
David
G3UNA
So RX equalization is most useful to those of us who like a wide CW
filter b/w.
Yes, Bud, it would be very nice if the RX eq was mode specific.
73,
Drew
AF2Z
___
Elecraft
I cut some of the higher bands as he did in order to reduce noise. But
not too much, in order to hear signals farther off freq I generally
use a pretty wide xfil to hear more of the adjacent signals. (There
aren't too many of them out there lately.)
Don't forget the dual passband CW feature of
Just curious, has anyone found RX eq to be useful for CW? Just
wondering what settings people like, if not flat.
73,
Drew
AF2Z
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
in this
decision. 73
Steve Ellington
[EMAIL PROTECTED]
- Original Message -
From: [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Saturday, June 21, 2008 9:16 AM
Subject: [Elecraft] K3 RX eq for CW
Just curious, has anyone found RX eq to be useful for CW? Just
wondering what settings
@mailman.qth.net
Subject: Re: [Elecraft] K3 RX eq for CW
Drew:
I have my sidetone pitch set for 550 Hz. The RX EQ is adjusted so that the
400 HZ band (button 4) is at +2 and the others above that are all set
for -16. This eliminated a lot of QRN and other band noise plus gives a
slight peak near
Bud
Nope. When you change from CW to SSB you'll have to redo those EQ settings.
Steve Ellington
[EMAIL PROTECTED]
- Original Message -
From: Bud Semon N7CW [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Saturday, June 21, 2008 6:44 PM
Subject: RE: [Elecraft] K3 RX eq for CW
16 matches
Mail list logo
