WPX contest with K3/Acom 1000 and 3 ele Steppir @ 40ft.a lot of fun
although condx were pretty poor here in the 'southern cone' for a little
pistol station. Mi amigo, CX6VM aka CW5W, did very FB job from his nice
contest station about 400km from here. I listened to his pileup several
times and he was working Qs that were ESP here...but then he has tall
towers and big iron...Congrats, Jorge.
The K3 was a pleasure to operate in this contest. I generally did SP as
I could not get anything going with Cqing...the exception was Sat
afternoon when had very nice EU pileup on 10m then later 15m. About the
RIT...I dont particularly care for using the RIT when running a
pileup...my preference is work split. The K3 was very easy to do this
with: AB, Split, then call CQ...that way I can use the big knob to fine
tune the callers which are off frequency (happens a lot).
My request for firmware change is to have a method to Lock VFO B so I
dont 'bump' the knob and lose my pileup. How about when Split
activated, Lock applies to VFO B?
A tip of the cap to Windy, KM5Q (I think it was you) who suggested
using CWT to fine tune the RF gain control...worked super! Major
'Ah-Ha'. There were times when PRE not needed at all and others when PRE
with RF gain backed off made the difference in working guys or not.
No AGC issue here with strong stations as the 1 skip zone falls in PY
land...the very few Monster stations were easily taken out with the
DSP...I have the 1.8, 500 and 250 roofing filters.
Finally, I also have a Orion II and can do A/B test between the two
rigscw is not even close...although the O II is a fine rig, there is
an annoying hiss which is much louder than the background noise of the
K3; have to almost constantly move the RFGain control to stay on top of
that with the O IIthe NR is STILL a work in progress w/TenTec...way
too much distortion at even a 2 rating. With the K3, I never use NR on
cw as the DSP does FB job. The O II is fatiguing to listen too compared
to the K3. OTOH, I do like the SSB sound of the O II better...it seems
much 'fuller' than the K3. Not that important to me as I do not do much
SSB. I probably need to delve into the K3 RX equal settings and play
with that...anybody got recommended RX settings for SSB?
73
Tom
CX7TT
K3 #250
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
