In regards to motion stopping during the "unexpected real
time delay" popup - It doesn't. I can test this really
easy with my laptop. My laptop has a intel chipset that
has issues with rtai.
http://www.captain.at/rtai-smi-high-latency.php
The emc developers found this patch and We got my syst
On Tue, Dec 26, 2006 at 08:17:20PM +0100, Mario. wrote:
> So, if it is a warning, not an disaster-meaning message, why does it
> put the machine to a halt without decelerating down?
It doesn't! Now I'm really puzzled. If the machine is stopping,
something else is going on and we need more infor
So, if it is a warning, not an disaster-meaning message, why does it
put the machine to a halt without decelerating down? It could at least
slow down and say: your machining has been paused... Steppers with
large inertia may lose step. I think it is time to program in some
predefined shutdown manag
Hi Mario,
thanks for the detailed report. I'll be waiting for the exact
messages.
But until them some clarifications:
> So, what the problem was:
>
> 1) I made a new computer and a fresh install Ubuntu 6.06LTS,
> +EMC2.0.5, +axis
I assume you used the debian packages. How do you run emc? (var1
I will post report as soon as network will be working again on the EMC machine
complete install is "by-the-manual" found on the webpages, so... I
cannot remember if the RTAI was built from source :-(
OK, I found the manual - so, I did compile something, but the magma
core is from the ubuntu repos
On Tue, Dec 26, 2006 at 10:27:40AM +0100, Mario. wrote:
> So, what the problem was:
>
> 1) I made a new computer and a fresh install Ubuntu 6.06LTS, +EMC2.0.5, +axis
> 2) The Geforce 6100 VGA was installed as vesa in xorg.conf
> 3) When I changed the VGA to GeForce 7300 GT, all problems/features
>
So, what the problem was:
1) I made a new computer and a fresh install Ubuntu 6.06LTS, +EMC2.0.5, +axis
2) The Geforce 6100 VGA was installed as vesa in xorg.conf
3) When I changed the VGA to GeForce 7300 GT, all problems/features
remained exactly the same.
4) Meanwhile... I made 2 new setup confi
ght want to take that out during testing (to rule out every possible cause of
problems).
- Original Message -
From: Mario.
To: Alex Joni ; EMC developers
Sent: Tuesday, December 26, 2006 2:05 AM
Subject: Re: [Emc-developers] Change in "feed override" during
machiner