On 3/8/24 13:03, Nicklas SB Karlsson wrote:
...
The theory is that even a bent spindle is effectively a perfect circle
if it is rotating faster than the servo loop
Diameter?
Doesn't care as long as the centering move stops the probe noise. If
things get really tight around the 12 ga, I run i
On 3/8/24 12:46, Nicklas SB Karlsson wrote:
tor 2024-03-07 klockan 21:26 -0500 skrev gene heskett:
Greetings all;
one of the problems I am having when using a reasonable speed to search
for the edge of a hole is that it does not stop fast enough on first
contact, and leaves the probe touching t
> ...
> The theory is that even a bent spindle is effectively a perfect circle
> if it is rotating faster than the servo loop
Diameter?
Nicklas Karlsson
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.n
On 3/8/24 10:47, andy pugh wrote:
On Fri, 8 Mar 2024 at 02:29, gene heskett wrote:
is there a way to make it ignore such a false trigger
during the first few milliseconds of the back to center move?
My probing routines do a fast probe onto the edge (G38.2) and then a
slower move out of con
tor 2024-03-07 klockan 21:26 -0500 skrev gene heskett:
> Greetings all;
>
> one of the problems I am having when using a reasonable speed to search
> for the edge of a hole is that it does not stop fast enough on first
> contact, and leaves the probe touching the side of the hole as it spins
>
On Fri, 8 Mar 2024 at 02:29, gene heskett wrote:
> is there a way to make it ignore such a false trigger
> during the first few milliseconds of the back to center move?
My probing routines do a fast probe onto the edge (G38.2) and then a
slower move out of contact (G38.4)
And I keep the result
On 3/7/24 21:28, gene heskett wrote:
Greetings all;
one of the problems I am having when using a reasonable speed to search
for the edge of a hole is that it does not stop fast enough on first
contact, and leaves the probe touching the side of the hole as it spins
often enough I get a probe t
Greetings all;
one of the problems I am having when using a reasonable speed to search
for the edge of a hole is that it does not stop fast enough on first
contact, and leaves the probe touching the side of the hole as it spins
often enough I get a probe tripped on the next move which recenter
