On Thursday 07 February 2019 23:08:31 Gene Heskett wrote:
>
> But I'll see if I can get it back out of there tomorrow, and I still
> have the box & most of the packing from the 2nd one. I'll just put the
> 2nd one in this box, and wait for the fixed one for the 6040 gantry.
>
> Thanks Peter.
>
On Thursday 07 February 2019 22:37:16 Peter C. Wallace wrote:
> On Thu, 7 Feb 2019, Gene Heskett wrote:
> > Date: Thu, 7 Feb 2019 19:56:20 -0500
> > From: Gene Heskett
> > Reply-To: EMC developers
> > To: emc-developers@lists.sourceforge.net
> > Subject: Re:
On Thu, 7 Feb 2019, Gene Heskett wrote:
Date: Thu, 7 Feb 2019 19:56:20 -0500
From: Gene Heskett
Reply-To: EMC developers
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] 7i76 vs spinout signal
On Thursday 07 February 2019 19:41:20 Peter C. Wallace wrote:
Yes its
On Thu, 7 Feb 2019, Gene Heskett wrote:
Date: Thu, 7 Feb 2019 19:33:46 -0500
From: Gene Heskett
Reply-To: EMC developers
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] 7i76 vs spinout signal
On Thursday 07 February 2019 15:49:09 Gene Heskett wrote:
On Thursday 07
On Thursday 07 February 2019 15:49:09 Gene Heskett wrote:
> On Thursday 07 February 2019 13:07:53 Gene Heskett wrote:
> > On Tuesday 05 February 2019 21:49:21 Gene Heskett wrote:
> > > So ATM I have a reserved input for the probe, and the steppers to
> > > wire step-dir sigs to, and I think put
On Thursday 07 February 2019 13:07:53 Gene Heskett wrote:
> On Tuesday 05 February 2019 21:49:21 Gene Heskett wrote:
> > So ATM I have a reserved input for the probe, and the steppers to
> > wire step-dir sigs to, and I think put the probe on a 5 pin plug
> > thats not busy.
> >
> > Then I should
On Monday 04 February 2019 13:34:55 Gene Heskett wrote:
> On Monday 04 February 2019 12:09:05 Peter C. Wallace wrote:
>
> Steppers still not fully connected. With the cable and connectors I
> have, I'll put 2 on each connector, saveing me a space on the back
> panel for whatever. But that will
On Monday 04 February 2019 12:09:05 Peter C. Wallace wrote:
> On Mon, 4 Feb 2019, Gene Heskett wrote:
> > Date: Mon, 4 Feb 2019 05:13:08 -0500
> > From: Gene Heskett
> > Reply-To: EMC developers
> > To: emc-developers@lists.sourceforge.net
> > Subject: Re:
On Mon, 4 Feb 2019, Gene Heskett wrote:
Date: Mon, 4 Feb 2019 05:13:08 -0500
From: Gene Heskett
Reply-To: EMC developers
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] 7i76 vs spinout signal
On Sunday 03 February 2019 20:03:28 Peter C. Wallace wrote:
On Sun, 3 Feb
On Sunday 03 February 2019 20:03:28 Peter C. Wallace wrote:
> On Sun, 3 Feb 2019, Gene Heskett wrote:
> > Date: Sun, 3 Feb 2019 19:56:53 -0500
> > From: Gene Heskett
> > Reply-To: EMC developers
> > To: emc-developers@lists.sourceforge.net
> > Subject: Re:
On Sun, 3 Feb 2019, Gene Heskett wrote:
Date: Sun, 3 Feb 2019 19:56:53 -0500
From: Gene Heskett
Reply-To: EMC developers
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] 7i76 vs spinout signal
On Sunday 03 February 2019 09:30:46 Peter C. Wallace wrote:
On Sun, 3 Feb
On Sunday 03 February 2019 14:45:38 Peter C. Wallace wrote:
> the nuts on those connectors which are below the boards in this box.
>
> Now in the next step of wiring this up I have a pair of 40 amp SSR's,
> with 5.11+ on both + terminals of the SSR's, and am using
> hm2_5i25.0.7i76.0.0.outputs 15
On Sunday 03 February 2019 09:30:46 Peter C. Wallace wrote:
> On Sun, 3 Feb 2019, Gene Heskett wrote:
getting TLDR, clipped most of whats been solved
>
> The 7I76 spindle ENA and DIR outputs are independent of the analog
> value of spinout, (though the analog out is forced to 0 if spinena is
>
the nuts on those connectors which are below the boards in this box.
Now in the next step of wiring this up I have a pair of 40 amp SSR's,
with 5.11+ on both + terminals of the SSR's, and am using
hm2_5i25.0.7i76.0.0.outputs 15 and 14 with the idea that turning them on
will ground the
On Sun, 3 Feb 2019, Gene Heskett wrote:
Date: Sun, 3 Feb 2019 14:34:13 -0500
From: Gene Heskett
Reply-To: EMC developers
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] 7i76 vs spinout signal
On Sunday 03 February 2019 09:30:46 Peter C. Wallace wrote:
On Sun, 3 Feb
ote:
> > > > Date: Sat, 2 Feb 2019 19:01:59 -0500
> > > > From: Gene Heskett
> > > > Reply-To: EMC developers
> > > > To: emc-developers@lists.sourceforge.net
> > > > Subject: Re: [Emc-developers] 7i76 vs spinout signal
> > > >
> On 3 Feb 2019, at 15:30, Peter C. Wallace wrote:
>
> The 7I76 spindle ENA and DIR outputs are independent of the analog value
> of spinout,
However, motion.spindle.is-on is false if spindle speed is zero. Perhaps this
is a Hal thing?
___
On Sun, 3 Feb 2019, Gene Heskett wrote:
Date: Sun, 3 Feb 2019 07:16:13 -0500
From: Gene Heskett
Reply-To: EMC developers
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] 7i76 vs spinout signal
On Sunday 03 February 2019 01:19:26 Peter C. Wallace wrote:
On Sat, 2 Feb
On Sunday 03 February 2019 01:19:26 Peter C. Wallace wrote:
> On Sat, 2 Feb 2019, Gene Heskett wrote:
> > Date: Sat, 2 Feb 2019 21:46:24 -0500
> > From: Gene Heskett
> > Reply-To: EMC developers
> > To: emc-developers@lists.sourceforge.net
> > Subject: Re:
On Sat, 2 Feb 2019, Gene Heskett wrote:
Date: Sat, 2 Feb 2019 21:46:24 -0500
From: Gene Heskett
Reply-To: EMC developers
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] 7i76 vs spinout signal
On Saturday 02 February 2019 19:51:18 Peter C. Wallace wrote:
On Sat, 2
On Saturday 02 February 2019 19:51:18 Peter C. Wallace wrote:
> On Sat, 2 Feb 2019, Gene Heskett wrote:
> > Date: Sat, 2 Feb 2019 19:01:59 -0500
> > From: Gene Heskett
> > Reply-To: EMC developers
> > To: emc-developers@lists.sourceforge.net
> > Subject: Re:
On Sat, 2 Feb 2019, Gene Heskett wrote:
Date: Sat, 2 Feb 2019 19:01:59 -0500
From: Gene Heskett
Reply-To: EMC developers
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] 7i76 vs spinout signal
On Saturday 02 February 2019 16:00:04 Andy Pugh wrote:
> On 2 Feb 2
On Saturday 02 February 2019 16:00:04 Andy Pugh wrote:
> > On 2 Feb 2019, at 18:13, Gene Heskett wrote:
> >
> > But whats the range of spindle speed requests that are valid in that
> > case.
>
> Approx -1.8 x 10^308 to +1.8 x 10^308
>
> Because it’s a double precision floating point.
>
> Are
On Saturday 02 February 2019 11:00:21 Peter C. Wallace wrote:
> On Sat, 2 Feb 2019, Gene Heskett wrote:
> > Date: Sat, 2 Feb 2019 07:37:11 -0500
> > From: Gene Heskett
> > Reply-To: EMC developers
> > To: emc-developers
> > Subject: [Emc-developers] 7i76 vs spinout signal
> >
> > Can someone
> On 2 Feb 2019, at 18:13, Gene Heskett wrote:
>
> But whats the range of spindle speed requests that are valid in that
> case.
Approx -1.8 x 10^308 to +1.8 x 10^308
Because it’s a double precision floating point.
Are you reading the 7i76 manual or just the LinuxCNC docs?
On Saturday 02 February 2019 10:19:48 Andy Pugh wrote:
> > On 2 Feb 2019, at 13:37, Gene Heskett wrote:
> >
> > Can someone please explain to me, who is used to using a spinx1 for
> > the pwmgen output to analog voltage conversion, just how in tuncket
> > the 7i76 works?
>
> The 7i76 has a
On Sat, 2 Feb 2019, Gene Heskett wrote:
Date: Sat, 2 Feb 2019 07:37:11 -0500
From: Gene Heskett
Reply-To: EMC developers
To: emc-developers
Subject: [Emc-developers] 7i76 vs spinout signal
Can someone please explain to me, who is used to using a spinx1 for the
pwmgen output to analog
> On 2 Feb 2019, at 13:37, Gene Heskett wrote:
>
> Can someone please explain to me, who is used to using a spinx1 for the
> pwmgen output to analog voltage conversion, just how in tuncket the 7i76
> works?
The 7i76 has a (serial controlled) digital potentiometer. You just pass it a
the
28 matches
Mail list logo
