with multi axis behaviour in Gmoccapy
nad QTDragon
On Wed, 7 Feb 2024 at 07:04, Marius wrote:
> G49 should not be used with a multi axis machine at all and there should
> be an option either on the gui or in the setup to allow the user to make
> the choice if they want to use it or not.
Can yo
On Wed, 7 Feb 2024 at 07:04, Marius wrote:
> G49 should not be used with a multi axis machine at all and there should
> be an option either on the gui or in the setup to allow the user to make
> the choice if they want to use it or not.
Can you convert this into an issue report? Otherwise it is
On 2024/02/06 18:20, Marius wrote:
Hi
If I stop any Gcode program using the cycle stop button while any of
the rotational axis (B and C) are not at 0 or home position, then I
get a joint following error on joint 0 and joint 2 (X and Z). If the
head is situated at the zero or home location
Hi
If I stop any Gcode program using the cycle stop button while any of the
rotational axis (B and C) are not at 0 or home position, then I get a
joint following error on joint 0 and joint 2 (X and Z). If the head is
situated at the zero or home location then there is no problem.
The