Hello Mark,
This is more of a customer acceptance issue in North America when handling DC
powered battery chargers. Do you want NRTL Listing for product liability
protection reasons? Do your customers expect it? If so, you may want to have
your battery charger NRTL Listed as an accessory to you
Hello Brian,
This was defined by a NRTL to be a Class III battery charger.
Thank you,
Mark
From: Brian O'Connell [mailto:oconne...@tamuracorp.com]
Sent: Wednesday, September 20, 2017 1:55 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Battery Charger
From: Schmidt, Mark [mailto:markschm
Thanks Ted,
Appreciate the input. The plan for Europe was to test to IEC60335-2-29 for
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY Part 2-29: Particular
requirements for battery chargers, for applied due diligence. I think it makes
sense for my customer to drive the direction so thanks
From: Schmidt, Mark [mailto:markschm...@xrite.com]
Sent: Wednesday, September 20, 2017 7:38 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Battery Charger
Hello Group,
I am trying to understand which standard would be applicable for a single Li-on
battery charger. It would be powered by an ex
Ken,
IEC 61204-3 requires 2 kV line to ground, and 1 kV line to line for AC power
ports. It is the same in the 2000 and 2016 editions. The levels are the same
for EN 55024 and EN 61000-6-2.
David
From: Ken Javor [mailto:ken.ja...@emccompliance.com]
Sent: Wednesday, September 20, 2017 8:57 AM
Hello all,
I am seeking contacts at EU regulatory agencies to determine “unique country
frequency allocations" that are not referred to in ERC REC 70-03.
Any guidance would be appreciated to discover non-harmonized frequencies, I
guess.
Thanks in advance,
Mike
Michael Violette, P.E.
Directo
Hi All,
I am trying to confirm my understanding of the correct path for creating
DoCs for hosts and USB radio modules under RED.
In our case, we make a few LTE USB modems that are specifically for use
with our full range of branch and mobile routers. (i.e. the form factor is
one designed to sli
Hello Group,
I am trying to understand which standard would be applicable for a single Li-on
battery charger. It would be powered by an existing 12 VDC LPS that already has
all the required regulatory evaluations and markings on it. We already use this
EPS on many of the products that we curren
Got the required responses in just a couple minutes. Thank you all!
Ken Javor
Phone: (256) 650-5261
From: "Schaefer, David"
Date: Wed, 20 Sep 2017 14:13:17 +
To: Ken Javor , "EMC-PSTC@LISTSERV.IEEE.ORG"
Conversation: EN61000-4-5 severity level question
Subject: RE: EN61000-4-5 severity le
Can someone out there tell me which of the four severity levels applies to
an industrial power supply with 115 vac input and 28 Vdc output. Designed to
mount to a rail and typically be embedded in another piece of equipment.
Other standards applicable are:
emissions: Compliance to EN55011, EN55022
10 matches
Mail list logo