On second thought EMC consultant Ghery Pettit is an excellent better
starting point.
https://pettitemcconsulting.com/
Ghery has been directly involved with the design and build of several EMC
test sites including a 30 meter OATS.
Regards,
Manny
On Wed, Mar 10, 2021 at 11:11 AM Manny Barron
On Wed, 10 Mar 2021 07:03:43 +,
David Shidlovsky wrote:
> Any opinions as to when testing conducted and radiated missions of a medical
> device being tested to IEC 60601-1-2 can be performed to CISPR 14-1 or CISPR
> 32 instead of CISPR 11?
> Would it be more appropriate to test a medical
Hi Mark,
ETS-Lindgren is a good starting point:
http://www.ets-lindgren.com/
Also here's an interesting helpful article:
https://incompliancemag.com/article/lessons-learned-from-the-design-and-construction-of-an-open-area-test-site-oats-and-sound-measurement-building/
There are important factors
Last time I did this was 20 yrs ago. At the time the company I was with
partnered with a smaller EMC lab who consulted with us and helped with the NSA
measurements. We ended up sharing a set of dipole antennas through the
arrangement.
Josh
Joshua Wiseman
Systems Engineering
Staff Engineer, Pro
Hi Mark,
Been a couple decades (at least) since I looked into this but ETS-Lindgren
might be one company to look at.
Dan
From: Stultz, Mark [mailto:0f79f2e10e47-dmarc-requ...@listserv.ieee.org]
Sent: Wednesday, March 10, 2021 11:50 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSE
Hello,
In an effort to get more accurate pre-compliance measurements, we're looking
into building an OATS setup. Does anyone know of any companies in the US that
will install/build one?
Thanks,
Mark Stultz
10175 Philipp Parkway
Senior Mechanical Development Engineer
Streetsboro, OH 44241
CM
David
There's further guidance on the application of performance criteria to radio
and non-radio function in ETSI EN 303 446-1 V1.2.1,
https://www.etsi.org/deliver/etsi_en/303400_303499/30344601/01.02.01_60/en_30344601v010201p.pdf
Best regards
Charlie
Charlie Blackham
Sulis Consultants Ltd
Tel
Hi David,
I understand that only non-radio functions are affected by ESD testing, but
that you deem this acceptable according to the non-radio product immunity
requirements of EN 55035. The introduction of EN 301 489-1 states: "When it is
required to evaluate the EMC performance of "combined ra
8 matches
Mail list logo
