Then you haven't dealt with agilent (no caps on purpose) lately. Ask them if
they can spell the other company's name.
I have been through similar hoops as of late, and they couldn't spell RS.
Regards,
JOHN E. STUCKEY
From: emcp...@aol.com [mailto:emcp...@aol.com]
Sent: Tuesday,
And above the undercarriage of the kite.. as long as one is not
inverted, but when you settle the pipper center the ball, check the
deflection and have a go at the bloce.
-Original Message-
From: Chris Maxwell [mailto:chris.maxw...@nettest.com]
Sent: Thursday, October 24, 2002
It is implied by the statistical analysis of a sample population during
formal conformity assessment. Reference EN 55022:1998 Clause 7 (7.2.3)
Regards,
JOHN E. STUCKEY
EMC Engineer
NCT EMC 002047
Micron Technology, Inc.
Quality and Reliability Assurance
EMC Group
M/S 941
3176 S. Denver Way
The sign at China Lake:
WHAT YOU
SEE HERE, SAY HERE, DO HERE,
STAYS HERE!
JOHN E. STUCKEY
EMC Engineer
NCT EMC 002047
ENOUGH SAID! and OORAH! (my brother Marines in the community will
understand)
Thank you.
JOHN E. STUCKEY
EMC Engineer
NCT EMC 002047
-Original Message-
From: Chris Maxwell [mailto:chris.maxw...@nettest.com]
Sent: Thursday, September 13, 2001 09:09
To: Chris Chileshe;
That which does not kill us, makes us stronger.-Friedrich Nietzsche
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your
Com-Power 2122Pre-amp 500 MHz to 22 GHz $6,500.00
PA-122
Very flat response curve. I have been very happy with mine.
Regards,
JOHN E. STUCKEY
EMC Engineer
Micron Technology, Inc.
Integrated Technology Group
Micron Architectures Lab
8455 West Emerald
Boise, ID 83704
Ph.
I just couldn't resist. How many times do I have to tell you about blow
drying your hair in the shower?
JOHN E. STUCKEY
-Original Message-
From: Bill Ronzio [mailto:bill.ron...@flextronics.com]
Sent: Wednesday, January 24, 2001 12:14
To: 'Mark Gill'; peter.tar...@sanmina.com; 'PSTC -
47 CFR Ch. I (10-1-98 Edition) § 2.803
§ 2.803 Marketing of radio frequency devices prior to equipment
authorization.
(a) Except as provided elsewhere in this section, no person shall sell or
lease, or offer for sale or lease (including advertising for sale or lease),
or import, ship, or
Where I have seen this practiced it was done so using a 5 meter distance in
a listed SAC using the 10 meter CISPR 22 limit. The limit level was NOT
increased on a linear interpolation, as there was no proof that the EUT's
emissions exhibited a linear roll-off. All of this allowed the EUT to be
If you can find these please include the ITE applicable standards or source
as the same problem exist with them. I have spent a considerable amount of
time looking for English translations in the ITE arena to no avail.
Thank you for any and all assistance in advance.
Regards
JOHN E.
The statement is:
Additional cards of a representative mix will be added until the emissions
do not increase by less than 2 dB.
JOHN E. STUCKEY
EMC Engineer
Micron Technology, Inc.
Integrated Products Group
Micron Architectures Lab
8455 West Emerald St.
Boise, Idaho 83704
PH: (208)
Hopefully in that case it has to be MIL STD tested for service above deck
and in the overhead mast, and you get to choose the host subject. Sales and
Marketing just acquired a new line in their job description.
-Original Message-
From: Angus McGill (Cascade Engineering Svcs, Inc.)
Identify the source of propagation for these frequencies and their egress
path. If you can successfully lower the radiated emissions level from these
you should have a subsequent decrease in your susceptibility. If you are
having a problem at 3V/m, the radiated emissions should be fairly
Thank you very much for you Security Awareness. Given my background it is
refreshing to see and should be punctuated with exclamation points,
especially in this day and time.
Best Regards,
John E. Stuckey
-Original Message-
From: Ken Javor [mailto:ken.ja...@emccompliance.com]
Sent:
I had forwarded this to Vic upon receiving his request last week, but
viewing some on the responses that I have seen, I feel it would be
appropriate to put it out for general viewing.
Look at 47 CFR
§ 2.803 Marketing of radio frequency devices prior to equipment
authorization.
(a) Except as
Well, I'm glad you have your body armour on and properly adjusted. One
problem, when that load of napalm hits your going to wish it was only
bullets.
JOHN E. STUCKEY
EMC Engineer
Micron Technology, Inc.
Integrated Products Group
Micron Architectures Lab
8455 West Emerald St.
Boise,
The question is posed; what is the wisdom behind all these standards?
Indeed the are numerous standards that have been, are, and will be brought
into existence effect every aspect of our various industries. The history of
the beginnings of these regulates can be traced back to the events of the
Contact ISMAEL MARTINEZ NCE/NCT 210-522-3631 imarti...@swri.org
SwRI EMCR group does a large amount of work in this area for government and
civilian applications.
JOHN E. STUCKEY
EMC Engineer
Micron Technology, Inc.
Integrated Products Group
Micron Architectures Lab
8455 West
19 matches
Mail list logo