Dear Grace,
You may use ANSI C63.4 or CISPR 16-1-2 for the calibration of LISNs.
The parameters to be calibrated are Impedance, Phase, Isolation and Insertion
loss.
Kind regards
Mario Lehmann
Geschäftsbereich European Compliance Laboratory (ECL)
Ich werde ab 05.12.2008 nicht im Büro sein. Ich kehre zurück am
12.01.2009.
Bitte kontaktieren Sie gweinfurt...@herberg-sp.de oder +49 911 59835 927.
Please contact gweinfurt...@herberg-sp.de or call +49 911 59835-927.
-
This message is from the IEEE Product Safety Engineering Society
Dear Colleagues,
what is the procedure to certify such equipment. It is a double tuner (2
antennas) with 3 frequency ranges (100k-30M, 30M-3G, 100k-3G). It provides two
analog IF OUT options:
IF1: BW=3MHz at 10.7MHz
IF2:BW=30kHz at 455 kHz
...and has LAN/USB capability. The PSU is a wide
Thanks a lot for your help Dennis!
Kind regards
Mario Lehmann
Geschäftsbereich European Compliance Laboratory (ECL)
__
HERBERG.
Service Plus GmbH Tel:+49 911 59835-923
Nordostpark 51 Fax:+49 911 59835-90
Thank you all for your valueable comments.
Kind regards
Mario Lehmann
Geschäftsbereich European Compliance Laboratory (ECL)
__
HERBERG.
Service Plus GmbH Tel:+49 911 59835-923
Nordostpark 51 Fax:+49 911
Dear Members,
I´ve heard that FCC will not accept rod antenna measurements below 30 MHz.
This was´nt puplished anywhere in the rules.
May I ask you to help finding a source on the FCC web site to get such
important informations in the future?
Kind regards
Mario Lehmann
Geschäftsbereich
Ich werde ab 08.09.2008 nicht im Büro sein. Ich kehre zurück am
19.09.2008.
Bitte kontaktieren Sie gweinfurt...@herberg-sp.de oder +49 911 59835 927.
Please contact gweinfurt...@herberg-sp.de or call +49 911 59835-927.
-
This message is from the IEEE Product Safety Engineering Society
Ich werde ab 09.07.2008 nicht im Büro sein. Ich kehre zurück am
14.07.2008.
Bitte kontaktieren Sie gweinfurt...@herberg-sp.de oder +49 911 59835 927.
Please contact gweinfurt...@herberg-sp.de or call +49 911 59835-927.
-
This message is from the IEEE Product Safety Engineering Society
Can somebody give advice, which FCC requirements apply for Card Readers and
what is the procedure?
Thank you in advance!
Mario Lehmann
Geschäftsbereich European Compliance Laboratory (ECL)
__
HERBERG.
Service Plus GmbH
Grace,
you need to use the RTTE Directive where LVD and EMCD are included.
For RTTE see radio standards.
Kind regards
Mario Lehmann
Geschäftsbereich European Compliance Laboratory (ECL)
__
HERBERG.
Service Plus GmbH
Ich werde ab 21.05.2008 nicht im Büro sein. Ich kehre zurück am
02.06.2008.
Bitte kontaktieren Sie gweinfurt...@herberg-sp.de oder +49 911 59835 927.
Please contact gweinfurt...@herberg-sp.de or call +49 911 59835-927.
-
This message is from the IEEE Product Safety Engineering Society
11 matches
Mail list logo