We use TUVRNA for NRTL very successfully.
Paul J. Smith, Teradyne, Boston
richwo...@tycoint.com@majordomo.ieee.org on 02/07/2002 02:17:45 PM
Please respond to richwo...@tycoint.com
Sent by: owner-emc-p...@majordomo.ieee.org
To: emc-p...@majordomo.ieee.org
cc:
Subject: TUV NRTL
Hi,
I remember there was a relatively recent discussion on the a website that
can provide the various regulatory requirements and or contacts for each
country throughout the world.
Does anyone still have that website address?
Thanks for your anticipated help.
REgards,Paul J Smith ,
Naftali
The subject virus was not on my system, so I am surprised by your email.
Maybe interscan was reacting to the
subject text.
Thanks Paul J Smith, Teradyne
Naftali Shani nsh...@catena.com on 01/24/2002 04:14:01 PM
To: 'paul_j_sm...@notes.teradyne.com'
Have you folks heard of a W32.magister virus
There are two (2) variants that I have heard of w32.magister.24876@mm
and w32.magister.39921@mm
Is there any way an infected system with windows 98 can be booted with the
above virus? Is there any available website with
John,
A statement in the product's site prep guide to say Installation by a
locally licensed electrician is required. Electrical installation must
conform to local jurisdiction electrical code. would be helpful.
By including this statement the local licensed electrician must used the
proper
To All,
Thanks to all who replied.
the switch supplier's compliance guy informed me that the w in a circle is
his factory designation.
Thanks Paul J Smith, Teradyne.
---
This message is from the IEEE EMC Society Product Safety
Technical Committee
Chet,
The back of the UL recognized component directory yellowbooks lists company
trademarks.
Paul J Smith, Teradyne, Boston
Summers, Chet csumm...@pelco.com@majordomo.ieee.org on 12/06/2001
04:21:57 PM
Please respond to Summers, Chet csumm...@pelco.com
Sent by:
Hi List Members,
I would like to develop an in-house standard that references all relevant
microwave standards for test and measurement equipment or ATE.
Does anyone have info on these related standards titles and numerical
designations?
Thanks in advance for your help.
Best Regards,
Carmen,
The Mil-Hdbk-338, rev B ELECTRONIC RELIABILITY DESIGN plus base document
is available free at website
http://astimage.daps.dla.mil/quicksearch/
Your taxes already paid for it.
ASSIST-QuickSearch
FSC/Area Title Document Number Document ID
ASSIST-Quick
Folks,
It was pointed out that my quote from SEMI S2-0200e is incorrect. I would
like to restate my question to include the correction. I apologize for any
inconvenience my error has caused. My corrected question is as follows.
.
Can anyone cite a reference document /
Folks,
Can anyone cite a reference document / standard that determines if there is
a minimum dBA sound level variation above an expected ambient environment
that is suitable for a pulsing alarm.
In my review , I have found that SEMI S2-0200E Environmental, Health, and
Safety Guideline
for
Folks
Does anyone know of a lockout tagout product that can be inserted and
locked into an IEC 320 style receptacle to prevent another AC cord from
being inserted.
Best Regards,Paul J Smith
Teradyne, Inc.,
Boston, MA 02111
Jon,
contact
Eric George
Ergonomics, Inc.
Product Safety and EMC Test Equipment
P.O. Box 964
Southampton, PA 18966
800-862-0102/215-357-5124
Fax 215-364-7582
i...@ergonomicsusa.com
www.ergonomicsusa.com
The above is being forwarded and should not be construed as an endorsement
by either
Folks,
The subject discussion is appropriate for the audience if it can be focused
on possible methods to continue to ensure safety compliance. Several
Standards (including SEMI S10, EN 1050 etc. ) require that a written risk
assessment also be provided to demonstrate compliance to the
FYI,
The following excerpt from CSA website is being forwarded and should not
be construed as an endorsement by either myself or my employer.
Paul J. Smith, Teradyne Inc., Boston
http://directories.csa-international.org/
Introducing CSA's
Dear Colleagues,
Teradyne is seeking the services of a Principal Mechanical Engineer, who is
also a licensed PE to provide the guidance and leadership required to
complete a thorough product review for Risk Assessment.
This individual should possess the following skill sets and/or experiences.
Folks,
Can anyone recommend a New England Test lab that has the test capability
needed for the following thermal and humidity test for a three bay system
and a separate workstation on a cart?
-non-operating, -40 to 72 degrees C. 95% humidity. non condensing.
-operating 9 to 36
FUBAR
Failed UniBus Address Register [DEC Engineering]
F%^ed Up Beyond All Recognition [US military, WWII]
FUBARD
(past tense of) FUBAR
Massey, Doug C. masse...@ems-t.com@majordomo.ieee.org on 06/13/2001
02:14:47 PM
Please respond to Massey, Doug C. masse...@ems-t.com
Sent
Ed,
After recent inquiry, I found that an alternate way to get access to Free
Mil specs from the following website is to just put the numerical number of
the spec in the document number block. I am forwarding this bit of info
per recent request.
http://astimage.daps.dla.mil/quicksearch/
Best
Dear Folks,
It was recently suggested that an STA be on file with the FCC so that a
scan test can be done outside a screen room ?
Does anyone have any details on this STA process and who to contact to
complete this STA application.
Best Regards,Paul J Smith
John,
You can get it or any other MIL spec downloaded free.
...Previous threads have covered Mil Std availablility, but you can
search for any
MIL STD at: http://astimage.daps.dla.mil/quicksearch/
Entering MIL-STD-883b under Document ID brings up the entry for this one,
and
from there you
Good Morning,
Does anyone know if there are any Israeli regulatory requirements or
certifications marks for safety and EMC for products to Israel?
Thanks in advance for any replies.
Best Regards,
Paul J Smith
Teradyne, Inc.,
Boston, MA 02111
Folks,
I have been asked about info on any ATE
(specifically VLSI) standards and features
that software systems should support.
The standards may include what formats of
device input data should be supported
(or consider supporting) as well as output
formats for results.
If it is not
Andy,
Attached is requested subject posting on manuals.
Paul J. Smith, Teradyne, Boston
O'Shaughnessy, Paul paul_oshaughne...@affymetrix.com@ieee.org on
12/13/2000 02:31:10 PM
Please respond to O'Shaughnessy, Paul paul_oshaughne...@affymetrix.com
Sent by: owner-emc-p...@ieee.org
To:
Doug,
You might also try website http://www.power-cord.com/locator/symbols.htm
for various International Approval Symbols.
Best Regards,Paul J Smith
Teradyne, Inc., Boston, MA 02111
paul.j.sm...@teradyne.com
POWELL, DOUG
For UL 1981 STANDARD FOR SAFETY FOR CENTRAL STATION
AUTOMATION SYSTEMS
Refer to website http://ulstandardsinfonet.ul.com/scopes/1981.html
Regards,Paul J Smith
Teradyne, Inc.,
Boston, MA 02111
Richard,
For participating countries refer to http://www.cbscheme.org/cbcntris.htm
Regards, Paul J. Smith, Teradyne, Boston
Richard Lee r...@terawave.com on 10/09/2000 05:54:10 PM
Please respond to Richard Lee r...@terawave.com
Thanks to all who responded to my inquiry on regarding verifying
functionality of the equipment for Production Safety Testing. Your
comments have been very helpful.
Best Regards, Paul S.
---
This message is from the IEEE EMC Society Product Safety
Folks,
My manufacturing contacts have asked for a lead on a supplier of test
equipment that I can use to be able to test the Hi pot lead for it not to
be open. If you run the Hi Pot test holding the lead in the air it will
pass . We need a way to test that the lead is not open .
The Test
29 matches
Mail list logo