ing I just wrote is
> wrong.
>
>
>
> Ted Eckert
>
> Microsoft
>
> The opinions expressed are my own and do not necessarily reflect those of
> my employer.
>
>
>
> *From:* Brian Kunde
> *Sent:* Friday, June 7, 2019 6:10 AM
> *To:* EMC-PSTC@LISTSERV.IEEE.
Subject: [PSES] Stacking Grounds on a Stud
My question(s) is about stacking ground lugs on a single stud for the
Protective Earth Terminal inside of a piece of electrical equipment (IT or Lab
Equipment).
Where is it documented how to properly stack ground lungs?
I have seen this done
Hi Brian,
There is some good information in the book "EMC for Systems and Installations”
by Armstrong and Williams,
and do not necessarily reflect those of my
employer.
From: Brian Kunde
Sent: Friday, June 7, 2019 6:10 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Stacking Grounds on a Stud
My question(s) is about stacking ground lugs on a single stud for the
Protective Earth Terminal inside of a piece
It's documented in many places, mostly fairly consistently. IEC 62368-1
for IT (see 5.6.5 and Table 32) and IEC 61010-1 for lab equipment.
Obviously, your point 3 shows not only very bad practice, but culpable
ignorance of the EUT designer, and the NRTL people in the final case you
report.
My question(s) is about stacking ground lugs on a single stud for the
Protective Earth Terminal inside of a piece of electrical equipment (IT or
Lab Equipment).
Where is it documented how to properly stack ground lungs?
I have seen this done several ways:
1. A welded stud or just a bolt (#6 or
6 matches
Mail list logo
