RE: EN 55022:1998 plus A1:2000

2003-02-07 Thread Grasso, Charles
'; Pettit, Ghery; ieee pstc list Subject: RE: EN 55022:1998 plus A1:2000 Cortland, Look at Figure 10 from Amendment 1 to CISPR 22:1997. It clearly shows clamps sitting on top of the turntable. Article 10.4 of CISPR 22:1997 (Amendment 1) states All cables leaving the table-top EUT for a connection

RE: EN 55022:1998 plus A1:2000

2003-02-07 Thread Pettit, Ghery
From: Cortland Richmond [mailto:72146@compuserve.com] Sent: Friday, February 07, 2003 10:47 AM To: Pettit, Ghery; ieee pstc list Subject: RE: EN 55022:1998 plus A1:2000 Ghery Pettit wrote: shall be fitted with ferrite clamps placed on the floor Well, darn. Unfortunately, I am

RE: EN 55022:1998 plus A1:2000

2003-02-07 Thread Cortland Richmond
Ghery Pettit wrote: shall be fitted with ferrite clamps placed on the floor Well, darn. Unfortunately, I am not right now in a position where I can procure or look at standards. However... I am disappointed that the writers took the route they did. I thought we were moving away from

RE: EN 55022:1998 plus A1:2000

2003-02-07 Thread Pettit, Ghery
this with them since 2000 and they haven't agreed to the clamps yet. Ghery From: Cortland Richmond [mailto:72146@compuserve.com] Sent: Thursday, February 06, 2003 9:03 PM To: Pettit, Ghery; ieee pstc list Subject: RE: EN 55022:1998 plus A1:2000 Ghery Pettit wrote: The cables

RE: EN 55022:1998 plus A1:2000

2003-02-07 Thread Cortland Richmond
Ghery Pettit wrote: The cables are specified to enter the clamp at the point where the cable reaches the surface of the turntable. I don't believe that your suggestion meets this requirement. Yes, and I thought about that; if ferrites start where the cable enters the ground plane, that

RE: EN 55022:1998 plus A1:2000

2003-02-06 Thread Pettit, Ghery
this requirement. Ghery From: Cortland Richmond [mailto:72146@compuserve.com] Sent: Thursday, February 06, 2003 3:20 PM To: ieee pstc list Subject: Re: EN 55022:1998 plus A1:2000 Tim Pierce wrote: The new amendment calls out for ferrite tubes on all power cables and I/O cables exiting the test

Re: EN 55022:1998 plus A1:2000

2003-02-06 Thread Cortland Richmond
Tim Pierce wrote: The new amendment calls out for ferrite tubes on all power cables and I/O cables exiting the test site. The problem I'm finding is that the FCC will not accept this test setup. Does anyone know if the FCC is going to approve this test setup? What of buried cables? It is

RE: EN 55022:1998 plus A1:2000

2003-02-06 Thread Pettit, Ghery
Tim, Officially, the DoW is still 1 August 2003. However, a number of alphabet groups have written letters to the commission asking that EN 55022:1998 be delayed again as the telecommunication port conducted emissions test problems won't be fixed in time. That will have the effect of delaying

Re: EN 55022:1998 plus A1:2000

2003-02-06 Thread lfresea...@aol.com
In a message dated 2/6/2003 4:10:16 PM Central Standard Time, emcp...@aol.com writes: Also, does anyone recommend where to buy these ferrite tubes? Hi Tim, Schaffner makes these. Call John Parnell on 1-800-367-5566 He's on Ext 225 ( I think ) I'm sure there are others... Cheers, Derek