The H pattern was to increase monitor emissions; turning the electron beam
on and off periodically was a surefire way to raise emissions. I've seen a
monitor with H's make a computer _beside the EUT_ test fail conducted
emissions even though turned OFF.
Nowadays a Windows (etc) halftone pattern
Thanks to all who responded on this subject!
Ken Javor
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to emc-p...@ieee.org
Instructions:
Compatibility
IEEE 05888136
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Tarver, Peter
Sent: Thursday, June 07, 2007 10:56 AM
To: Ken Javor; EMC-PSTC@listserv.ieee.org
Subject: RE: Exercising test sample during emissions testing
From: Ken Javor
Sent: Wednesday, June
In message
be3336be85968d49be01e66d6e365b1e01f54...@sjc1amfpew01.am.sanm.corp,
Tarver, Peter peter.tar...@sanmina-sci.com writes
The only present day standard (that I've seen) that comes right out and
says to use an H pattern is CISPR 22:1997. I don't see the scrolling H
as a specific
Hi Ken,
Check in ANSI C63.4 for (at least for US) testing requirements.
Para 11.1.3 lists the operational conditions for VDU or monitor.
Best Regards
Charles Grasso
Compliance Engineer
Echostar Communications Corp.
Tel: 303-706-5467
Fax: 303-799-6222
Cell: 303-204-2974
Pager/Short Message:
From: Ken Javor
Sent: Wednesday, June 06, 2007 9:42 PM
A long time ago, when DOS was the PC operating system, I seem
to recall that a PC undergoing emissions testing was supposed
to continually write the character H to the CRT display.
What is the requirement today under CISPR or other
6 matches
Mail list logo