Brent,
I did some research on this subject a while back. The following web sites
should be helpful:
US International Trade Commission http://www.usitc.gov/sec/I0619S3.HTM
The Trade Information Center http://www.ita.doc.gov/td/tic/
US Department of Commerce
...@majordomo.ieee.org] On Behalf Of Brent DeWitt
Sent: Thursday, July 18, 2002 6:24 PM
To: Garry Hojan; brent.dew...@us.datex-ohmeda.com;
emc-p...@majordomo.ieee.org
Subject:RE: made in requirements?
Gary,
Sorry. It's Medical Electrical Equipment. Both the MDD and FDA have
...@majordomo.ieee.org
Cc:
Subject: RE: made in requirements?
Gary,
Sorry. It's Medical Electrical Equipment. Both the MDD and FDA have
been
searched with no apparent need for this marking, but this may not be
correct
Sent: Thursday, July 18, 2002 6:47 PM
To: brent.dew...@us.datex-ohmeda.com; emc-p...@majordomo.ieee.org
Subject: RE: made in requirements?
Hello Brent,
Can you let us know the basic category of product? The marking requirements
for Country of Origin vary depending on the product and of course
Hello Brent,
Can you let us know the basic category of product? The marking requirements
for Country of Origin vary depending on the product and of course, the
country that the product is intended to be marketed in. There will be two
areas that you might have to address this issue, first in the
Try this link for a start
http://www.customs.ustreas.gov/imp-exp2/import/marking.htm
Robert Sem
Sr. Product Regulations Engineer
Intel Corporation
5200 NE Elam Young Pkwy. MS JF#-410
Hillsboro, OR 97124 U.S.
Phone (503) 264-4430
Fax (503) 264-0124
robert.k@intel.com
-Original
6 matches
Mail list logo