I am not sure if anyone has already posted an answer to this question,
but we use NPL. The contact details are:
Mr M Alexander
Antenna Calibration Dept.
National Physical Laboratory
Queens Road
Teddington
Middlesex
TW11 0LW
Tel: 0181 943 7175
Fax: 0181 943 6458
I hope this is of use.
Regards
In my experience, the integrator is the party responsible for final
system compliance, as configured (IOW - I agree with Bob). If something
fails in the test in the final configuration, it's just good business
sense for all parties involved to work trogether to solve the problem.
Example: My
Resending following message:
FROM: Georg M. Dancau, 100536,2175
TO: emc-pstc group, INTERNET:emc-p...@ieee.org
DATE: 11.03.1997 05:35
Re: Copy of: Re: Specs for VDE878
Patrick Lawler plaw...@west.netwrote:
I've come across a product requirement spec'ing VDE878
Reply to: RETAA and Year 2000 Requirements?
Mike,
First of all, could you tell me what type of product that your company is
marketing? If you let me know. I could narrow the product categories to
figure out what TAA stands for.
Year 2000 is coming. All product softwares must be
We have a potential use for thoriated-tungsten filament wire which,
because of the thorium, is slightly radioactive - somewhat like a
luminous watch dial. A search of US regulations shows that such wire is
specifically exempted from NRC licensing requirements if it has less
than 4% thorium. Does
Again I will direct your attention to the Guide to the implementation of
Community harmonization directives based on the new approach and the global
approach published by the the European Communities, ISBN 92-826-8584-5.
Under section II, 1. Placing on the market, page 20,
The following are
Some comments [ ] based on Tom's note:
Article 3 of the EMC Directive states, ...apparatus referred to in
Article 2 may be placed on the market or taken into service only if it
complies with the requirements laid down by this Directive when it is
installed and maintained
To the best of my knowledge, RS no longer has it's own reps
in the U.S. since signing up with Tektronix in a joint
marketing agreement. The local Tektronix office should be
able to help.
Tek phones:
San Diego: (310)643-6977
Irvine: (714)660-8080
L.A.: (818)340-9840
Good luck,
Draft - New EMC European Guidelines is available at:
..
A copy of the new Commission Guidlines for EMC can be found at:-
http://www.emc-journal.co.uk/newguide.html
Webmaster
Nutwood UK Ltd
Mirko
9 matches
Mail list logo
