. They also made up an aluminium holder
for the filter which meant we were able to easily slot it in/out of the
(telecoms) equipment chassis for cleaning and/or replacement.
Brian McAuliffe
MCA Compliance Consulting
13 Silver Grove, Ennis, Co.Clare, Ireland
Tel: +353.65.6823452
Mobile: +353.87.2352554
. They also made up an aluminium holder
for the filter which meant we were able to easily slot it in/out of the
(telecoms) equipment chassis for cleaning and/or replacement.
Brian McAuliffe
MCA Compliance Consulting
13 Silver Grove, Ennis, Co.Clare, Ireland
Tel: +353.65.6823452
Mobile: +353.87.2352554
marking ??
Brian McAuliffe
MCA Compliance Consulting
13 Silver Grove, Ennis, Co.Clare, Ireland
Tel:+353.65.6823452
Mobile: +353.87.2352554
Email: i...@mcac.ie
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc
as no design or production changes occur.
I have seen the benefits of HALT but never quite got to the HASS stage.
Brian McAuliffe
MCA Compliance Consulting
-Original Message-
From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Massimo Polignano
Sent
I know that Sprint (the US telephone company) did use at ione stage a TS
numbering system for their EMC/Physical requirements documents.
Brian McAuliffe
MCA Compliance Consulting
Ireland
Tel:+353.65.6823452
Mobile: +353.87.2352554
Email: i...@mcac.ie
-Original Message-
From: owner
Can anybody identify with below ?
Brian
Tellabs
-Original Message-
From: richard Murphy richard.mur...@ie.flextronics.com
[SMTP:richard Murphy richard.mur...@ie.flextronics.com]
Sent: Tuesday, January 09, 2001 10:41 AM
To: McMahon, Nuala
Cc: richard Murphy
Jack
Have a look at TBR 12 (2mbit leased line). Its available FOC from the
ETSI website http://www.etsi.org
Brian McAuliffe
Tellabs Ireland
-Original Message-
From: jmur...@quantumbridge.com [SMTP:jmur...@quantumbridge.com]
Sent: Tuesday, August 01, 2000 10:09 PM
To: emc-p
Does anybody know if the 8590 series can spit out PAL format ? and if
the same modulator would do the job ?
Brian
Tellabs
-Original Message-
From: ral...@igs.net [SMTP:ral...@igs.net]
Sent: Tuesday, July 25, 2000 4:16 AM
To: sco...@world.std.com; jim_bac...@mail.monarch.com
Cc:
Tania has summed up the situation pretty well below, one that I can
certainly relate to.
What existed in my last company were:
Procedures - to describe the high level policy;
Work Instructions - for very specific, and sometimes critical (but not
necessarily), usually repetitive tasks.
Having
I think the point raised by Gary re: where the Compliance group fits into
the organisation structure is more important than procedures/process,
although I disagree with him about where that should be. Let me explain.
Having a good working relationship with Engineering is indeed critical,
however
Equipment in general).
Can/must this spec be used as the basis for making a Declaration of
Conformity with the Directive ?
Regards,
Brian McAuliffe
Snr Regulatory Engineer
Design Assurance
Tellabs Ltd
Tel: +353.61.703269
email: brian.mcauli...@tellabs.com
is a type of spiral
gasket ? Where can I get info/specs/samples from?
Brian McAuliffe
brian.mcauli...@tellabs.com
-Original Message-
From: rbusche
Sent: 19 March 1998 16:55
To: MikonCons; emc-pstc
Cc: rbusche
Subject: RE: Spira EMI Gaskets
We have recently started using a spiral gasket
MCA Compliance Solutions Ltd wishes to recruit a Senior Technician and/or a
Junior Technician to work in its Product Safety Lab.
Senior Technician
-
1. Must have a proven track record in product safety. This experience can
have been gained in either a product safety test lab
any recommendations for a fine-wire thermocouple tip welder ?
Brian
Brian McAuliffe
MCA Compliance Solutions Ltd
Unit 2 Lissane Business Park|Clarecastle|Co.Clare|Ireland
w: www.mcac.ie
e: i...@mcac.ie
t: +353 (0)65 6823452
m: +353 (0)87 2352554
Brian McAuliffe
MCA Compliance Solutions Ltd
Unit 2 Lissane Business Park|Clarecastle|Co.Clare|Ireland
w: www.mcac.ie
e: i...@mcac.ie
t: +353 (0)65 6823452
m: +353 (0)87 2352554
---
This message is from the IEEE EMC Society Product Safety
Technical Committee
try Sorensen at www.sorensen.com
Brian McAuliffe
-Original Message-
From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Jim Robson
Sent: 09 August 2002 22:47
To: 'EMC-PSTC - forum'
Subject: 48 Volt Telco Power Supply
Hello Group,
Does
any recommendations for sources of hire (preferrably in UK/Ireland) and/or
purchase of test equipment suitable for performing the leakage current tests
specified in EN60601-1:1990 ?
thanks
Brian McAuliffe
MCA Compliance Solutions Ltd
w: www.mcac.ie
e: i...@mcac.ie
t: +353 (0)65 6823452
m: +353
chosen.
Brian McAuliffe
MCA Compliance Solutions
www.mcac.ie
-Original Message-
From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Brian O'Connell
Sent: 15 July 2002 14:25
To: emc-p...@majordomo.ieee.org
Subject: RE: EN60950 3rd vs EN60950-1
I would agree, kind of like IEC/EN 60335 for domestic electrical and similar
equipment.
Brian McAuliffe
MCA Compliance Solutions
www.mcac.ie
-Original Message-
From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Ron Pickard
Sent: 15 July 2002
Can UL 94 V-1, V-2 etc ratings be regarded as equivalent, more stringent or
less stringent than IEC 60707 FV-1, FV-2 etc. ?
Brian McAuliffe
MCA Compliance Solutions Ltd
Unit 2 Lissane Business Park|Clarecastle|Co.Clare|Ireland
w: www.mcac.ie
e: i...@mcac.ie
t: +353 (0)65 6823452
m: +353 (0)87
Can anyone define, or point me to a definition of, a Class 2 Power Unit i.e.
as covered by UL 1310.
I know I could buy the standard to find out but ..
Brian McAuliffe
MCA Compliance Solutions Ltd
Unit 2 Lissane Business Park|Clarecastle|Co.Clare|Ireland
w: www.mcac.ie
e: i...@mcac.ie
t
21 matches
Mail list logo