All-
Anybody know where to find AT&T Pub 83401? Global and AT&T don't have
it...I'm looking for a place to purchase to document.
Thanks,
Dwight
Any TIES users / ITU Sector Members have access to this document on the ITU
website?
http://www.itu.int/itudoc/itu-t/com15/dcontr/01-04/dc-feb01/029.html
[COM15-D029] Centillium Communications, Texas Instruments, ADC
Telecommunications, Ikanos Communications(Q4/15): G.voice: Potential
Me
Anyone know where to obtain a copy of SBC BSP 802-001-180MP (their grounding
and bonding spec)? thanks
Dwight
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ew
> Anyone know if AT&T's website has AT&T 54014 (ACCUNET T45) available?
> Global doesn't seem to have it. thanks
>
> Dwight
>
Test folks-
Anyone out there have a Wiltron 9361B signaling test set? Does the manual
include calibration instructions? We have a unit with no manual, and wonder
if it's worth having it calibrated. It comes in handy when doing dial-pulse
compatibility testing. Thanks
Dwight
Darrell-
You can pick up a set online for $560...I haven't found equipment houses
that rent it, since it's a low-dollar item...they just tell you to buy a set
from EMCO:
http://www.emctest.com/emchtm/7405.cfm?model=7405
Dwight
-Original Message-
From: Ken Javor [mailto:ken.ja...@emccom
about this subject.
Don
Don Robert House
Sr. Member Technical Staff
Excelsus Technologies, Inc.
2875 Loker Avenue East
Carlsbad, CA 92008-6626
(760)918-2552 Office
(760)476-1519 FAX -Original Message-
From: Dwight Hunnicutt [mailto:dwight.hunnic...@vina-tech.com]
Sent: Wednesday, May 02, 2001
NEBS folks-
Anyone know of external secondary protectors that can be installed outside
of one's product to pass GR-1089 lightning and power cross testing? That
is, if we don't have room on our boards for the fuse/sidactor circuitry, I
understand a company can specify a certain protector be insta
they be
required to go through FCC Registration once the rules are published?
As snipped from a third-party test house quote, can anyone support or deny
the below statement?
Dwight Hunnicutt
VINA Technologies, Inc.
SDSL was not required to be tested to FCC Part 68 requirements last year
All-
Our system test guys are concerned that we don't vary our T1 card indicator
LED color to distinguish between minor, major, and critical alarms. I recall
a Bellcore spec that says we have to do this. Can anyone help me track down
the spec reference for this? thanks
Dwight
--
Anyone know where to obtain a draft copy of the H.248 spec? The ITU-T
website says "To Be Published" and a "06/00" date, but doesn't say when
it will really be available...
Thanks
D
--
---
This message is from the IEEE EMC Society Product Safety
Technica
Anyone know where to obtain a draft copy of the new HDSL2
Interoperability standard T1E1.418-2000? I believe the document is
still undergoing final revisions, but a recent draft copy would be a big
help. Thanks...
D
--
_
DWIGHT HUNNICUTT
fer much help...thanks
Dwight
--
_________
DWIGHT HUNNICUTT Sr.Compliance Engineer
_/_/ _/ _/_/ _/
_/_/ _/ _/_/ _/ _/ _/
_/_/ _/ _/ _/_/_/_/
_/ _/_/ _/_/_/_/_/_/
_/ _/ _/_/_/_/
gee...no one can take a joke these days...lighten up, Hungarian ATM
wonks...laugh a little every now and then...
"Crabb, John" wrote:
>
> As the worlds "No. 1" manufacturer of ATMs, and probably the manufacturer
> of the ATM in question, I have received the following information from our
> pe
--
_
DWIGHT HUNNICUTT Sr.Compliance Engineer
r at their fingertips? thx
D
--
_____
DWIGHT HUNNICUTT Sr.Complianc
how about a website to download EN55024?
"Mowbray, John H" wrote:
>
> Gary
>
> The IEC maintains a webstore where you can download an electronic copy. You
> need a credit card to order. (http:\\www.iec.ch)
>
> Another source is Global Engineering Documents in Colorado. (800) 624-3974.
>
>
Is there a spec that is the E1 equivalent of US ANSI T1.403 that
specifies the E1 performance stats ( i.e. ESS, SESS, CSS, etc)? G.823
doesn't have the performance statistics we're looking for...
D
--
_____
DWIGHT HUNNICUTT Sr.Complianc
Item #2 would set an interesting precendent...just about every
electronic product on the market has some solder...so everything from
the little beeping, blinking toy imported from Asia, to home theatre
equipment, to your desk phone, fax machine, and pager would need a Prop.
65 warning marking?
ADTRAN, INC.
> 901 Explorer Blvd.
> P.O. Box 14
> Huntsville, AL 35814-4000
> 256-963-8431
> 256-963-8250 fax
> jim.wi...@adtran.com
>
> > --
> > From: Dwight Hunnicutt[SMTP:dwight.hunnic...@vina-tech.com]
> > Sent: Wednesd
Anyone been required to guarantee that their equipment must operate
"for office battery range as per TR-NWT-000406"?
I assume this means your equipment will operate in a DC supply range per
TR-406. Anyone know the range? thanks
D
--
___
DWIGHT HUNN
ypical to telecom applications? How about hole spacing?
--
_______
DWIGHT HUNNICUTT
Sr. Compliance Engineer
VINA Technologies, Inc.
510-771-3349
520-244-2721 fax
www.vina-tech.com
Anyone know a source for the document "Report 28", a Technical report
prepared by T1.E1.4 Working Group, Digital Subscriber Lines, HDSL, June
1994?
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line
oth topologies described in application
notes for various interface components, and have had to deal with both.
Any light shed will be appreciated by all.
D
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 771-3349 direct *
* (
Keep in mind that the 28% oxygen index pertains to individual materials
within the equipment (PWB's, etc.), rather than some sort of overall
empirical measurement during the system fire test.
In a nutshell, materials are tested in an oxygen-controlled environment
to see if they will support combus
What's the E1 75-ohm unbalanced standard for France? Do they have a
National requirement like the U.K. (NTR4)? Any bizarre differences from
U.K requirements? Any alternatives? thanks...
D
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* VINA Technol
Euro-telecom experts:
Is NTR 4 the same as BS PD 7024:1994 (National U.K. standard for
unstructured E1 75-ohm unbalanced service)?
If not, does anyone know a source for the NTR 4 document? thanks...
D
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510
er SR-TSV-002476).
D
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 413-1349 direct *
* (510) 492-0808 fax *
* VINA Technologies,Inc. *
* 42709 Lawrence Place*
* Fremont, CA 94538 *
-
This messa
technology. So the holes are still around in many applications...
Dwight
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 413-1349 direct *
* (510) 492-0808 fax *
* VINA Technologies,Inc. *
* 42709 Lawrence Place*
* Fremont, CA 94538
check straps? I'm sure there is more to it than
that...any good books to read, or websites to plunder? Any US or Euro
standards to follow for the engineering group (per ISO9001) ?
Dwight
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 413-1349 direct
h box for varying REN into multiple
lines? Any suppliers of inexpensive load panels out there?
thanks in advance for your comments...
Dwight
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 413-1349 direct *
* (510) 492-0808 fax *
* VINA Technol
com unit using these types
of tests as a design verification tool, but one doesn't hear much about
it on the newswire...
Dwight
p.s. HALT - Highly Accelerated Life Testing
HASS - Highly Accelerated Stress Screening
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
thread of this message dealt with
a non-ITE standard, such as for laboratory or medical equipment. In
those environments, one might commonly use readily available "rubbing
alcohol" to clean an instrument, therefore the need to test permanence
with isopropyl alcohol.
--
DWIGHT HUNNICUT
of course, the "emi-catchers" lurking in the van would first have to
convince you to leave your ATM card with them so they could carry out
their dirty deed...
Dwight
Douglas Mckean wrote:
>
> How about ...
>
> The one where some creative types got some EMI(?) equipment
> to monitor the keystr
is changed from 60 to 50 Hz (while keeping Voltage the same). I
> did, however,
> see recently a product change emissions when the voltage was
> changed from 120
> to 230 V. And, it did not matter if it was 50 or 60 Hz, only the
> voltage was
> significant. G
st MPa cold/MPa operating.
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 413-1349 direct *
* (510) 492-0808 fax *
* VINA Technologies,Inc. *
* 42709 Lawrence Place*
* Fremont, CA 94538 *
Ar
abs
do not have 50Hz readily available...
Has anyone run into a problem with a European customer or agency
insisting on 50Hz?
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 413-1349 direct *
* (510) 492-0808 fax *
* VINA Technologies,Inc. *
*
want to unload?)
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 413-1349 direct *
* (510) 492-0808 fax *
* VINA Technologies,Inc. *
* 42709 Lawrence Place*
* Fremont, CA 94538 *
eving would of
course have to be 94V-2 or better...
Dwight
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
VINA Technologies,Inc.
POWELL, DOUG wrote:
>
> Moshe,
>
> I also have used an number of TO-220 transistor packages. In the past to
> get the isolation I used thin ceramic
ed
> Solihull Parkway
> Birmingham Business Park
> Birmingham
> B37 7YU
> Telephone +44 121 717 6492
> FAX +44 121 717 6014/6018
> e.mail- a.bo...@ftel.co.uk
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 413-1349 direct *
* (510) 492-0808 fax *
* VINA Technologies,Inc. *
* 42709 Lawrence Place*
* Fremont, CA 94538 *
Volkhard replies:
Volkhard Delfs wrote:
>
> I have not yet dealt with with DIN 0848 part2/-4 nor with ENV50166-1, -2,
> but perhaps you should approach to the german association of electrical
> engineers the VDE. This group together with the german institute of norms
> (DIN) creates german electr
m 730...
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510) 413-1349 direct *
* (510) 492-0808 fax *
* VINA Technologies,Inc. *
* 42709 Lawrence Place*
* Fremont, CA 94538 *
What's the quickest way to get a copy of the Instruction Book for
completing FCC Form 730? Is it residing somewhere on the web? Does the
government sell it? Or does one only get it at Albuquerque?
--
DWIGHT HUNNICUTT
Sr. Compliance Engineer
**
* (510
43 matches
Mail list logo