-type enclosure testing methods.
Intrinsically safe is a low-energy ignition-prevention method for haz loc,
but that is another story.
Mike Harris/Teccom
- Original Message -
From: richwo...@tycoint.com
To: emc-p...@majordomo.ieee.org
Sent: Monday, February 04, 2002 7:59 AM
Subject: Haz Loc
To: emc-p...@majordomo.ieee.org
Subject: Re: Haz Loc Testing
If you're serious about haz loc then I suggest that you purchase the
following
book from http://www.nfpa.org/Catalog/
Electrical Installations in Hazardous Locations
-Carl
From: richwo...@tycoint.com on 02/04/2002 10:59 AM
Hello Rich,
If you visit the Safety Link www.safetylink.com and then search for the
term hazloc using your browser's Find function (often Control F), you
will find 3 adjacent links to very good resources on this topic.
Immediately below those links you will find one on Intrinsic Safety, a
...@majordomo.ieee.org
cc:(bcc: Carl Newton/XYCOM)
Subject: Haz Loc Testing
It would be appreciated if someone would provide me with a brief overview of
the testing that is performed in order to classify electronic equipment for
use in a hazardous location where fuel vapors are located.
Richard Woods
/QA
Safety Laboratory
MET Laboratories-Baltimore
Phone: 410-354-3300 x 361
Fax: 410-354-3313
-Original Message-
From: richwo...@tycoint.com [SMTP:richwo...@tycoint.com]
Sent: Monday, February 04, 2002 11:00 AM
To: emc-p...@majordomo.ieee.org
Subject: Haz Loc Testing
It would
.
Regards,
Kaz Gawrzyjal
kazimier_gawrzy...@dell.com
-Original Message-
From: richwo...@tycoint.com [mailto:richwo...@tycoint.com]
Sent: Monday, February 04, 2002 10:00 AM
To: emc-p...@majordomo.ieee.org
Subject: Haz Loc Testing
It would be appreciated if someone would provide me with a brief
It would be appreciated if someone would provide me with a brief overview of
the testing that is performed in order to classify electronic equipment for
use in a hazardous location where fuel vapors are located.
Richard Woods
Sensormatic Electronics
Tyco International
7 matches
Mail list logo
