Ray Henry wrote..
BTW -- is this THE Ian! The one who tested the backplotter the day
after it's first release and found a way to make EMC barf on a NAN?
If yes, wow. Good to see you again. If not ignore most of this.
Hi Ray,
Yes, its me I'm afraid. Back again trying to break things - but
On Wed, Aug 22, 2007 at 02:35:03AM +0200, Michel Gouget wrote:
Is it difficult, very difficult or extremely difficult to add an NML+HAL
library to python?
It's already there -- it's the basis for such neat things as AXIS, the
hal_input userspace driver, and so on.
Help on module hal:
NAME
Gene,
i forgot to say to connect the neg lead to the tool
and the positive to the work
in this old rc way , it is more efficient to run 'negative head'.
it gets you a slightly larger gap and speed at the expense of more wear.
Kirk,
Thanks for the help. I have the files made onto the cd correctly now.I
think. When I put in the cd the ubuntu image comes up and it says launching
browser, after about 20sec. it just goes away and nothing. If I boot from
the cd, a blank screen comes up and just stays there. So still not
The first couple of cuts I was using a chord length of about 100mm,
meaning that my g-code statements around the leading edge where about
0.1mm apart or less, which caused the feedrate to slow down for some
reason, which caused too much heat to build up in the leading edge.
If you use G64
Congratulations, you have graduated to the next level of problems. I
also had problems loading a couple of my computers. Some of the things
to check which may or may not have an effect:
1) Have at least 256mB of RAM. You can reduce this after the
installation
2) Use a DVD drive (yeah, wierd, but
Thanks a lot, Jeff; this is exactly what I was looking for.
I will experiment and see what I can do
Michel
-
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now
Good job on adding the poll to linuxcnc.org . Kirk Wallace
-
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX
On Wed, 2007-08-22 at 09:36 -0500, Jeff Epler wrote:
On Wed, Aug 22, 2007 at 02:02:39PM +, ben lipkowitz wrote:
The first couple of cuts I was using a chord length of about 100mm,
meaning that my g-code statements around the leading edge where about
0.1mm apart or less, which
On Wed, Aug 22, 2007 at 12:00:42PM -0600, Ryan Hulsker wrote:
is there a way to tell it to use both xy and uv for the circle?
Nope, you'll have to split it up into lines in your gcode.
One of these days we need plug-in interpreters because gcode works so
differently for different machine
To all,
I have downloaded the live cd successfully..according to the mdsum check and
everything I've seen on the help pages. The cd will not boot, it only gives
me a blank screen. If I load the cd while the pc is running I get an ubuntu
screen that says launching browser and then goes away. I
On Wed, Aug 22, 2007 at 04:28:19PM -0400, Chris Mason wrote:
To all,
I have downloaded the live cd successfully..according to the mdsum check and
everything I've seen on the help pages. The cd will not boot, it only gives
me a blank screen. If I load the cd while the pc is running I get
Chris Mason wrote:
Kirk,
Thanks for the help. I have the files made onto the cd correctly now.I
think. When I put in the cd the ubuntu image comes up and it says launching
browser, after about 20sec. it just goes away and nothing.
This is normal. To make room for EMC, the Windows-based
I am using EMC2 and a gecko servo drive to drive a servo I have
mounted on my Millrite.
When I set the max speed to 1.0 (I think that is 1 ips or 60 ipm) I
get an error saying that the velocity is too high.
I the motor/encoder/gecko drive require 2000 steps per rev and the
lead screw is 5 tpi
14 matches
Mail list logo
