Please excuse me if this is the wrong place to ask but...
Is there a way to change the increment used when manually increasing or
decreasing (F12 F11) spindle speed in AXIS? In other words, if I want
my spindle set to 1000 RPM I have to hold down F12 for quite some time
to get it up to
Gentlemen,
I have been exploring a program called Xrefactory. Xrefactory is
supposed to build a display of the project's data flow. I have been in
contact with the company that sells Xrefactory. They told me they will
download the EMC2 project and run their program to see how to make
Jon,
After going through some doc about emc, I understood the encoder should
work with one signal (A and Z). I'll give that a try.
I did some tests with the ir leds and fototransistors of a canibalized
mouse and I guess this will work. I'll add an 7414 schmitt trigger to
avoid noise.
What I
Geert De Pecker wrote:
Jon,
After going through some doc about emc, I understood the encoder should
work with one signal (A and Z). I'll give that a try.
It should be A and B for just reading position, Z is the index
(zero).
I did some tests with the ir leds and fototransistors of a
Jon,
Is indeed rhino. Purchased it some years ago together with rhinocam.
A bit expensive for hobby use, but a very nice program and quite intuitive.
There is also a render output of a pcb board laminator I once made in
the folder http://users.skynet.be/gedp/FILES
Geert
Jon Elson wrote:
Geert
I have now been able to control the X axis motor from EMC2/Axis by
running it as root. So the system (Kernel with RTAI and EMC2) appears
functional. Does that indicate that my problem is purely a permissions
problem somewhere?
I did notice that I have to be logged in as root to run the RTAI
