Hi,
I wonder if gladevcp application can be started up just from a HAL
session, as an
standalone application not depending on AXIS or other interface, but just on a
developer's choice of hal components?.
Thank you,
Javier
Am 19.07.2011 um 11:31 schrieb Javier Ros:
Hi,
I wonder if gladevcp application can be started up just from a HAL
session, as an
standalone application not depending on AXIS or other interface, but just on a
developer's choice of hal components?.
Javier -
I'm a bit unclear what you mean
after playing with it:
yes you can
no, motion is not part of it (moving motors and stuff) because that's a
realtime component which assumes NML communication
-m
Am 19.07.2011 um 16:34 schrieb Michael Haberler:
Am 19.07.2011 um 11:31 schrieb Javier Ros:
Hi,
I wonder if gladevcp
since this has bitten me recently as well, I added a note to the wiki:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2#Resolving_outstanding_build_dependencies
-m
Am 13.07.2011 um 18:43 schrieb Sebastian Kuzminsky:
On 07/13/2011 10:31 AM, Daniel Rogge wrote:
Hello all,
My name
Thanks.
I had the right HOME_SEQUENCE value of -1 but wasn't aware of that it was
necessary to manually home the axis after a home-all.
Now can try making a button for homing the A-axis instead of traveling
menus :-)
/Niels
On 18 July 2011 23:48, Niels Jalling ni...@jalling.dk wrote:
How do
Niels,
You can home all the joints with Home all buttons, even if there is
no homing switch for one of the joints.
I did that for the welding robot - the rotary head did not (AFAIK it
still does not) homing switch, but it homed together with all the
other joints, which had homing switches.
In
On Tue, Jul 19, 2011 at 2:29 PM, Viesturs Lācis
viesturs.la...@gmail.com wrote:
Hello, gentlemen!
Today I completed a retrofit of plasma cutting machine. Now there is
one more EMC2 machine! BTW this one has 2 independent THC sensors
working together.
Since that machine is 3 hours of driving
Viesturs Lācis wrote:
I am aware of VNC, but maybe there are some built-in tools in Lucid?
What I need is the ability to connect to that PC so that I see the
desktop and, if I cannot take over the control of mouse and keyboard,
then at least I need some window, where I can paste instructions,
I recently converted my mill to EMC from Mach, and until now have been using
it only with subroutines. Tonight I tried running a program produced by
BobCAD v23, which I have used successfully with Mach, and ran into a problem
with tool length compensation. Basically, I could not get the offsets to
2011/7/19 Niels Jalling ni...@jalling.dk:
Hi Viesturs
Thank you for the tip. It worked.
Before made by Stepconf for the a-axis:
...
MAX_LIMIT = .0
HOME_OFFSET = 0.0
eof inifile
I added to my inifile
...
MAX_LIMIT = .0
HOME_OFFSET = 0.0
HOME_SEQUENCE = 0 --
eof inifile
So
10 matches
Mail list logo