Lester Caine wrote:
Lester Caine wrote:
I'm using the D2500HN for the CNC kits and that seems to be fine but only
has
the VGA output;)
OK turns out the D2500HN also has problems when running in Linux graphics
mode,
so as far as I am concerned they are not usable for Linux.
OK follow-up
On 18 July 2012 08:40, Lester Caine les...@lsces.co.uk wrote:
DN2800MT will install XP, Probably Vista, W7 and Linux with graphics switched
off. Enabling graphics in Linux seems to be hit and miss but basically there
are
no drivers for the Intel GMA 3600 graphics for Linux or XP but XP will
I've had mine sitting on the shelf gathering dust for a few months now. Too
busy to look at it at the moment.
Too many toys, so little time.
Cheers,
Peter
On 18/07/2012 1:55 PM, Jack Coats wrote:
Newark Electronics. Ordered it some time ago. They charged my card
when they were available
andy pugh wrote:
DN2800MT will install XP, Probably Vista, W7 and Linux with graphics switched
off. Enabling graphics in Linux seems to be hit and miss but basically
there are
no drivers for the Intel GMA 3600 graphics for Linux or XP but XP will run.
I don't understand the problem. I just
Peter Homann wrote:
I've had mine sitting on the shelf gathering dust for a few months now. Too
busy to look at it at the moment.
Too many toys, so little time.
Especially when things that should work out of the box don't :(
I WILL get a working LinuxCNC setup working! But then I've been
On Wed, Jul 18, 2012 at 5:48 AM, Lester Caine les...@lsces.co.uk wrote:
andy pugh wrote:
DN2800MT will install XP, Probably Vista, W7 and Linux with graphics
switched
off. Enabling graphics in Linux seems to be hit and miss but basically
there are
What do you mean by enabling graphics?
So what is the latest and greatest MB to use with LinuxCNC?
It seems the D525 is starting to get to be a little harder to find.
Anyone have any luck with something like this?
Intel BOXD2700MUD Intel Atom D2700 Mini ITX Motherboard/CPU Combo
Todd Zuercher wrote:
Anyone have any luck with something like this?
Intel BOXD2700MUD Intel Atom D2700 Mini ITX Motherboard/CPU Combo
http://www.newegg.com/Product/Product.aspx?item=N82E16813121596
It's the same chipset as the DN2800MT and the D2500HN, so no Linux driver
support, and seems
So what is a better option?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
--
P. Graham Dunn
Phone: 330-828-2105
E-mail: to...@pgrahamdunn.com
630 Henry St.
Dalton, OH 44618
www.pgrahamdunn.com
-Original Message-
From: Lester
Todd Zuercher wrote:
So what is a better option?
AT the moment the boards I WOULD have bought are on a long leadtime here.
Getting boards that are flexible is getting as difficult as ones with parallel
ports. Intel does seem to be following the M$ line and making all new product
targeted for
On Wednesday 18 July 2012 15:30:13 Gene Heskett did opine:
On Tuesday 17 July 2012 15:47:33 Jon Elson did opine:
Gene Heskett wrote:
Got them Jon, see at:
http://coyoteden.dyndns-free.com:85/gene/Genes-os9-stf/GCode/
Cheers, Gene
Whoopee! Kmail upchucked and started throwing away
On Wednesday 18 July 2012 20:40:19 Jon Elson did opine:
Gene Heskett wrote:
On Tuesday 17 July 2012 15:47:33 Jon Elson did opine:
Gene Heskett wrote:
Got them Jon, see at:
http://coyoteden.dyndns-free.com:85/gene/Genes-os9-stf/GCode/
Cheers, Gene
Well, I don't see anything
Hi ,
I want to do some woodcarving http://dict.cn/woodcarvings with Artcam. I
didnot find the .ngc OUTPUT in Artcam software. Are There any solutions?
Dylan from China
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
()_() signature to help him gain world domination.
Todd Zuercher wrote:
So what is a better option?
Directron and newegg show the D525MW box in stock.
Jon
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
The system I have uses an 8i20 drive. The input power is switched off
during estop, and when a key switch is actuated to make the machine
safe for manual tool changes. Upon turning power on, I get some error
messages displayed:
Smart Serial Error: port 0 channel 0
Smart Serial card error - (13)
2012/7/19 Zhikun Ba bazhi...@gmail.com:
Hi ,
I want to do some woodcarving http://dict.cn/woodcarvings with Artcam. I
didnot find the .ngc OUTPUT in Artcam software. Are There any solutions?
Did You try the most primitive approach:
Create standard g-code and change the extension of the file to
2012/7/19 Lester Caine les...@lsces.co.uk:
I was going to say that the DG945GCLF is still available however it seems that
there is no real stock, and the 'replacement' D425 series have the same
problem
graphics which where the minefield is slowly growing.
AFAIK D425 and D525 is the same,
17 matches
Mail list logo
