This is pretty awesome.
http://thecreatorsproject.vice.com/blog/video-exclusive-bot--dollys-the-box-unpacks-a-radically-new-design-concept
--
October Webinars: Code for Performance
Free Intel webinars can help you
I have managed to read the initial serial data which defines the absolute
position of an axis. The A and B channels of the absolute encoder are taken
to the 7i33 on P2 of a MESA 5i23 as usual, The A channel which also carries
the serial data when enabled initially, is also taken to a GPIO input on
On 26 September 2013 09:12, Rudy du Preez r...@asmsa.co.za wrote:
I now have to use the value to set the absolute position for the joint, but
have not found the best way to do this in Linuxcnc yet.
Any ideas from the experienced Linuxcnc users on this?
I _think_ that might be as simple as
Since it's time for OT: Robot magic, this is live:
http://www2.wien.info/de/longdistanceart/
- Original Message -
From: Sven Wesley svenne.d...@gmail.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Thursday, September 26, 2013 10:00 AM
Subject:
Hello,
Would like to discuss adoption of JogWhilePaused at Next meeting.
I often need to withdraw the tool from the cut to inspect cutter and
work. Perhaps it began to sound different and make me worry about
cutter. Maybe I see a clamp too close to tool path. I find the
JogWhilePaused a great
On 09/26/2013 01:06 PM, TJoseph Powderly wrote:
Hello,
Would like to discuss adoption of JogWhilePaused at Next meeting.
...
Thanks
TomP ( tjtr33)
More discussion is linked thru GladeVCP Toolchange tag
TomP
I second that. I put it on the agenda for the next meeting. I do agree
that it is very necessary and not just a nice to have. Damn man even
Mach can do it :)
On 2013/09/26 08:10 PM, TJoseph Powderly wrote:
On 09/26/2013 01:06 PM, TJoseph Powderly wrote:
Hello,
Would like to discuss
Marius, Tom -
Am 26.09.2013 um 21:08 schrieb Marius Liebenberg mar...@mastercut.co.za:
TomP
I second that. I put it on the agenda for the next meeting. I do agree
that it is very necessary and not just a nice to have. Damn man even
Mach can do it :)
On 2013/09/26 08:10 PM, TJoseph
Hello
I read this page
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?About_Charge_Pumps.
What is needed to make sure the BOB is only active when LinuxCNC is up,
running and healthy?
When LinuxCNC is not running, some outputs are in the wrong state.
Therefore, I would like to enable the BOB only
On Thu, 26 Sep 2013, Thomas Kaiser wrote:
Date: Thu, 26 Sep 2013 23:33:53 +0200
From: Thomas Kaiser c...@kaiser-linux.li
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users]
On Thu, 26 Sep 2013 23:20:43 +0200, you wrote:
- changing offsets or tool diameter will NOT be part of the release targeted
work - this is just too many moving parts to be realistic to expect.
- changing all UI's to use the new feature may not be realistic to expect
either - only few UI's
I have a file /etc/udev/rules.d/99-shuttlexpress.rules whose content is
SUBSYSTEM==hidraw, ATTRS{idVendor}==0b33, ATTRS{idProduct}==0020,
MODE=0666
But this does not seem to be applied as there is no hidraw folder
containing the device in /dev or /dev/input
Does anyone see what I might be
Hi all,
I saw this topic and thought hey its been a month or so since someone
complained about this. Many of the requests about the things they want to do
during this pause is unrealistic.
I think the solution is a tool check button that would move a distance away
and turn off the spindle.You
Am 27.09.2013 um 00:57 schrieb Steve Blackmore st...@pilotltd.net:
On Thu, 26 Sep 2013 23:20:43 +0200, you wrote:
- changing offsets or tool diameter will NOT be part of the release targeted
work - this is just too many moving parts to be realistic to expect.
- changing all UI's to use
Stuart,
I was looking for something else entirely on the web and ran into this
by accident. This is very close to what you want to do.
http://en.revija-ventil.si/data/strokovni-clanki/17-2011-4/situm.pdf
I use a lot of S7-1200 PLCs but I think that all of this could be done
with LinuxCNC.
On 09/24/2013 10:49 PM, andy pugh wrote:
On 24 September 2013 20:45, propcoder marius.alks...@gmail.com wrote:
I changed nvmaxcurrent parameter using setsserial to 3000. Maybe I
should power off the 8i20 board before testing new value?
Yes, I am pretty sure that is necessary.
Andy, you
From: mai...@mah.priv.at
Date: Fri, 27 Sep 2013 02:16:56 +0200
To: st...@pilotltd.net; emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] JogWhilePaused Proposal
Am 27.09.2013 um 00:57 schrieb Steve Blackmore st...@pilotltd.net:
On Thu, 26 Sep 2013 23:20:43 +0200, you wrote:
The Z axis on my mill has a BEI rotary encoder on its ballscrew, the table has
two Anilam System A-10 linear scales. All of them have a 5 wire connection,
conveniently still having wires run through conduit to the big box, and X and Y
connectors labeled. (Should be able to figure out which of
18 matches
Mail list logo
