On 05/04/2014 11:20 PM, Steve Blackmore wrote:
Jon - http://imagebin.org/309092
Tip of camera just touching surface. That's a 0.1mm gap set on the jaws
of my Mitu digimatic calipers. The ground surface looks good until you
zoom in :) Plenty good enough to find an edge.
Same 0.1mm gap.
On 05/04/2014 11:20 PM, Steve Blackmore wrote:
http://imagebin.org/309092
http://imagebin.org/309107
Image above with Sobel on lower half. You can really see how lighting
will effect how well the edges will be detected.
On Monday 05 May 2014 03:57:25 Steve Blackmore did opine:
On Sun, 4 May 2014 08:52:26 -0400, you wrote:
The first one resembles the anchoring for the 16mm5 screw used as the Z
on the lathe, 12mm bore and I had yet to get all the end play out of
it even though I have extra shims between the
On Monday 05 May 2014 04:26:30 Steve Blackmore did opine:
On Sun, 4 May 2014 23:14:51 -0400, you wrote:
Greetings all;
Today, after fighting with it yesterday and putting in nearly 10 thou
of x taper in 2.25 of Z travel before I got anywhere near a straight
turn
Ideas?
Read this
On Sun, May 4, 2014 at 7:58 PM, Stuart Stevenson stus...@gmail.com wrote:
I prefer inserted, but I don't make the rules.
Rules smules
If your question is answered
BE HAPPY
or you volunteer an answer
DO IT HOWEVER YOU WISH
My 2 cents
Stuart
And then there's Stuart's method. VBSEG
On Sun, May 4, 2014 at 7:35 PM, andy pugh bodge...@gmail.com wrote:
On 5 May 2014 00:09, rayj raymo...@frontiernet.net wrote:
Last question: What is the etiquette on this list for replies? Top,
bottom, or inserted under the relevant paragraph?
I prefer inserted, but I don't make the
On Mon, May 5, 2014 at 12:20 AM, Steve Blackmore st...@pilotltd.net wrote:
Jon - http://imagebin.org/309092
Tip of camera just touching surface. That's a 0.1mm gap set on the jaws
of my Mitu digimatic calipers. The ground surface looks good until you
zoom in :) Plenty good enough to find
~130um plated hole PCB
VGA microscope
http://imagebin.org/309193
--
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
#149; 3 signs your SCM is hindering your productivity
#149; Requirements
On 05/05/2014 02:00 AM, Bari wrote:
On 05/04/2014 11:20 PM, Steve Blackmore wrote:
Same 0.1mm gap. Camera body on the surface. With threshold and Sobel
edge detect.
http://imagebin.org/309105
OK, so how many pixels is that gap? Taking a wild guess, it
might
be about 40 pixels. That sounds
On 05/05/2014 11:01 AM, Jon Elson wrote:
On 05/05/2014 02:00 AM, Bari wrote:
On 05/04/2014 11:20 PM, Steve Blackmore wrote:
Same 0.1mm gap. Camera body on the surface. With threshold and Sobel
edge detect.
http://imagebin.org/309105
OK, so how many pixels is that gap? Taking a wild guess,
On Mon, 5 May 2014 05:23:32 -0400, you wrote:
On Mon, May 5, 2014 at 12:20 AM, Steve Blackmore st...@pilotltd.net wrote:
Jon - http://imagebin.org/309092
Tip of camera just touching surface. That's a 0.1mm gap set on the jaws
of my Mitu digimatic calipers. The ground surface looks good
On Mon, 5 May 2014 04:48:55 -0400, you wrote:
I suggested that a heavy steel bar, a 1x6 wide, nominally 24 long, to help
stiffen it up, and was told its a never mind. By someone on this list
about 2 coons ages ago. Whether I could find another at the scrap/recycle
yard about 50 miles away, I
On 05/05/2014 10:57 AM, Bari wrote:
~130um plated hole PCB
VGA microscope
http://imagebin.org/309193
Yes, I know the real microscopes can get an even higher
resolution image, but I'm trying to come up with something
small that will fit partly into the shank hole of an end mill
holder. I'd
On Monday 05 May 2014 22:13:12 Steve Blackmore did opine:
On Mon, 5 May 2014 04:48:55 -0400, you wrote:
I suggested that a heavy steel bar, a 1x6 wide, nominally 24 long, to
help stiffen it up, and was told its a never mind. By someone on this
list about 2 coons ages ago. Whether I could
14 matches
Mail list logo
