Found a really nice up / down counter on EBAY. Works immediately with single
ended rotary encoders. Although the description says that it does not display
negative numbers... It does! Has five digit display, four digits when counting
below zero, 0.56 in display, and cheap.
http://www.ebay.com/
On Thursday 18 June 2015 19:32:34 MC Cason wrote:
> Gene,
>
>I just did a teardown of my HF 12x36, and replaced the spindle
> bearings. What I found sickening, was that there was NO oiler hole
> for the rear bearing, and the front bearing's oiler hole was drilled
> to the wrong side of the bea
On 19 June 2015 at 00:32, MC Cason wrote:
> I just did a teardown of my HF 12x36, and replaced the spindle
> bearings. What I found sickening, was that there was NO oiler hole for
> the rear bearing, and the front bearing's oiler hole was drilled to the
> wrong side of the bearing,
My 9x20 lath
Gene,
I just did a teardown of my HF 12x36, and replaced the spindle
bearings. What I found sickening, was that there was NO oiler hole for
the rear bearing, and the front bearing's oiler hole was drilled to the
wrong side of the bearing, and was mostly covered by the bearing cup.
I upl
On Thursday 18 June 2015 12:22:46 John Thornton wrote:
> I usually get my fasteners from McMaster Carr because for the most
> part they are made in the USA.
>
> Metric Ultra Corrosion-Resistant Coated Class 12.9 Alloy Steel
> M4 × 0.7 x 20Full5091274A121$5.08
>
> As for my small s
I usually get my fasteners from McMaster Carr because for the most part
they are made in the USA.
Metric Ultra Corrosion-Resistant Coated Class 12.9 Alloy Steel
M4 × 0.7 x 20Full5091274A121$5.08
As for my small screw metric stock it is almost as old as you... well
not quite that
On Thursday 18 June 2015 11:50:56 Erik Christiansen wrote:
> On 18.06.15 11:03, Gene Heskett wrote:
> > The isolation tranny has not arrived yet, thats 56 lbs crated & I've
> > not piled all the motor psu stuff in one stack yet to see how big a
> > box I'll need to build. Thats a monster toroid,
On 18.06.15 11:03, Gene Heskett wrote:
> The isolation tranny has not arrived yet, thats 56 lbs crated & I've not
> piled all the motor psu stuff in one stack yet to see how big a box I'll
> need to build. Thats a monster toroid, and I'm of a mind to remove a few
> turns of the secondary as I ex
On Thu, Jun 18, 2015 at 11:06 AM, Mark Johnsen wrote:
> Mark - Thanks for the feedback. I removed all the single files and left
> the zip file so others won't have the same issue of downloading corrupt
> individual files.
>
> Thanks for looking at that,
> Mark J.
>
Happy to play in the sandbox!
On Thursday 18 June 2015 08:16:55 John Thornton wrote:
> I have in 4mm SHCS grade 12.9 the following lengths 10, 14, 25, and
> 50.
Hang onto them John. Thanks for looking. I might need some of those
50mm's some day.
> JT
>
> On 6/18/2015 6:57 AM, John Thornton wrote:
> > Gene,
> >
> > I'm pret
On Thursday 18 June 2015 08:08:52 Rick Lair wrote:
> Worst case, Fastenal.com sells them per each, around 20 cents a piece,
> prolly take a day or two on the big brown box truck to get them.
>
> Fastenal PN: 39527
>
> https://www.fastenal.com/products/details/39527?term=39527
>
> Rick
I already ha
Mark - Thanks for the feedback. I removed all the single files and left
the zip file so others won't have the same issue of downloading corrupt
individual files.
Thanks for looking at that,
Mark J.
--PREVIOUS
POST-
M
On Thursday 18 June 2015 07:57:06 John Thornton wrote:
> Gene,
>
> I'm pretty sure I have some of those screws... I just need to finish
> my coffee and go look in the metric screw box.
>
> JT
Thanks John, I appreciate the offer, but I have a by this late in the
morning, a 100 count box already in
On Thursday 18 June 2015 06:41:05 Mark Wendt wrote:
> On Wed, Jun 17, 2015 at 9:46 PM, Gene Heskett
wrote:
> > 5 each 4mmx.70x20mm black hi-tensile allen head cap screws.
> >
> > One coupling is missing its clamp screw, and one motor mount is
> > missing the mount screws for the Y motor. Box of
I have in 4mm SHCS grade 12.9 the following lengths 10, 14, 25, and 50.
JT
On 6/18/2015 6:57 AM, John Thornton wrote:
> Gene,
>
> I'm pretty sure I have some of those screws... I just need to finish my
> coffee and go look in the metric screw box.
>
> JT
>
> On 6/17/2015 8:46 PM, Gene Heskett wro
Worst case, Fastenal.com sells them per each, around 20 cents a piece,
prolly take a day or two on the big brown box truck to get them.
Fastenal PN: 39527
https://www.fastenal.com/products/details/39527?term=39527
Rick
On 6/18/2015 7:57 AM, John Thornton wrote:
> Gene,
>
> I'm pretty sure I
Gene,
I'm pretty sure I have some of those screws... I just need to finish my
coffee and go look in the metric screw box.
JT
On 6/17/2015 8:46 PM, Gene Heskett wrote:
> 5 each 4mmx.70x20mm black hi-tensile allen head cap screws.
>
> One coupling is missing its clamp screw, and one motor mount i
On Wed, Jun 17, 2015 at 9:46 PM, Gene Heskett wrote:
> 5 each 4mmx.70x20mm black hi-tensile allen head cap screws.
>
> One coupling is missing its clamp screw, and one motor mount is missing
> the mount screws for the Y motor. Box of 100, with ship, a few cents
> above a $20 bill. Heck, I burnt
18 matches
Mail list logo
