Re: [Emc-users] CAD/CAM for LinuxCNC, Freecad (bugtracker, G41 and G42 being swapped)

I will play this weekend and see if i can reproduce the issues I had On 16-05-12 02:42 PM, Nicklas Karlsson wrote: > Here is the bugtracker for path workbench > http://www.freecadweb.org/tracker/my_view_page.php in Freecad. If you know > the problem can you find it or file a good bug report? >

Re: [Emc-users] Fedora compile

On 13 May 2016 at 18:52, Przemek Klosowski wrote: > it wasn't obvious to me how to get about > editing the wiki; could someone point me in the right direction? Chips the penguin might help you: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?BasicSteps -- atp "A

[Emc-users] Fedora compile - Wiki Editing

> > Date: Fri, 13 May 2016 18:52:01 -0400 > From: Przemek Klosowski > Subject: [Emc-users] Fedora compile > To: "Enhanced Machine Controller (EMC)" > > Message-ID: >

[Emc-users] Fedora compile

I just compiled LinuxCNC on a fresh, minimal Fedora installation, and had to fight the dependencies. Fedora/Redhat aren't covered in LinuxCNC developer guides, so I thought I'd write it up. I'd be glad to write something for the website---it wasn't obvious to me how to get about editing the wiki;

Re: [Emc-users] Thanks and a question

Jim, In JA you don't need perfect switch alignment :) JT On 5/13/2016 12:32 PM, Jim Craig wrote: > John, > > I have been reading that. I may give that a try sometime but for now it > is working great with the gantry component. It was not that difficult to > set up. In fact the first time I

Re: [Emc-users] Mesa Reseller in America

Hi, I'm waiting on 7i78's and a few other cards to show up that I'm out of stock at the moment. I'll work on adding UPS to the shipping options. Turkey is another country that it is painful to use USPS. JT On 5/13/2016 2:41 PM, Aakash . wrote: > Put 7i78's too on your future stocking list,

Re: [Emc-users] Joint-Axis Branch?

On 13 May 2016 at 16:41, Dewey Garrett wrote: > emc/motion/emcmotcfg.h:#define EMCMOT_MAX_JOINTS 9 > emc/motion/emcmotcfg.h:#define EMCMOT_MAX_AXIS 9 > > There may be old, unknown, stale assumptions that these > values are identical or otherwise related. There goes my

Re: [Emc-users] Joint-Axis Branch?

In joints_axes branch (latest joints_axes14), it is a compile-time setting: emc/motion/emcmotcfg.h:#define EMCMOT_MAX_JOINTS 9 emc/motion/emcmotcfg.h:#define EMCMOT_MAX_AXIS 9 There may be old, unknown, stale assumptions that these values are identical or otherwise related. So changing

[Emc-users] change ngc program..

which file must see and study for make an c++or phyton app to change ngc program in Lcnc Ja session whit nogui? regardsGiorgio -- Mobile security can be enabling, not merely

Re: [Emc-users] Joint-Axis Branch?

for my epirience 9 axes... > Date: Fri, 13 May 2016 16:04:11 -0400 > From: zuerc...@embarqmail.com > To: emc-users@lists.sourceforge.net > Subject: [Emc-users] Joint-Axis Branch? > > I have a question, that I can't say that I've ever seen definitively > answered. I know that axis are limited to

Re: [Emc-users] Mesa Reseller in America

Put 7i78's too on your future stocking list, please! Also, (I'm writing from India) please add FedEx or UPS or some such parcel service in the options list. USPS maps to the Govt. mailing service called EMS here, which basically sucks for imports in ways too numerous to elaborate! Good inventory

[Emc-users] Joint-Axis Branch?

I have a question, that I can't say that I've ever seen definitively answered. I know that axis are limited to 9, but is there the same limit for joints? If it is limited to 9 in regulare Linuxcnc, is this different in the Joints-Axis branch? --

Re: [Emc-users] pyvcp spinbox focus issue

Interesting that you post this right now as I was just testing it. I can confirm the same with my machine. Apparently when I tried it the other day I used the numpad enter. On 5/13/2016 12:34 PM, Marius Alksnys wrote: > By the way, only main Enter key works, Enter on numeric keyboard >

Re: [Emc-users] pyvcp spinbox focus issue

By the way, only main Enter key works, Enter on numeric keyboard doesn't. Uhh.. On 2016.05.12 18:26, Jim Craig wrote: > That is interesting. I am sure that I tried the enter key as I > distinctly remember thinking about that and it did not seem to work. I > will try again to see if the thought

Re: [Emc-users] Thanks and a question

John, I have been reading that. I may give that a try sometime but for now it is working great with the gantry component. It was not that difficult to set up. In fact the first time I tried to set it up it worked. I just needed to get the home switches set so that it was aligned and then

Re: [Emc-users] hal edm (User interface) --> all kind of cutters

It is possible to add things to user interface with glade interface designer although I have not figured out how yet. There is also suitable m-codes to adjust parameters for EDM generator. There is motion.spindle although in reality there are all kind of cutters. In the long term although it

Re: [Emc-users] Thanks and a question

Jim, Is your gantry a dual motor gantry? If so JA13 can now home a gantry with no special setup like the gantry component. JT On 5/13/2016 9:42 AM, Jim Craig wrote: > First of all I want to thank everyone that provided advice on this > plasma cutter build I have been working on with my buddy.

Re: [Emc-users] hal edm (User interface)

Nicklas , whats needed for the edm interface , i'll dig into it if needed and probably design an easy addon for linuxcnc later. so Keep me in the loop. Sarah On 13 May 2016 at 13:52, Nicklas Karlsson wrote: > I got measurement for EDM generator voltage an current

Re: [Emc-users] Thanks and a question

On 5/13/2016 10:18 AM, Peter C. Wallace wrote: > Yes, the THCAD-10 has a continuous input overload voltage of 500VDC > Thanks Peter. That is what I thought I understood from the documentation but I wanted to make sure.

Re: [Emc-users] Thanks and a question

On Fri, 13 May 2016, Jim Craig wrote: > Date: Fri, 13 May 2016 09:42:15 -0500 > From: Jim Craig > Reply-To: "Enhanced Machine Controller (EMC)" > > To: emc-users > Subject: [Emc-users] Thanks and

[Emc-users] Thanks and a question

First of all I want to thank everyone that provided advice on this plasma cutter build I have been working on with my buddy. We finally have it all up and running with the Gantry HAL component and the THC HAL component. I want to especially thank John T. for the advice on the THC and all of the

Re: [Emc-users] Any users of "xlinuxcnc" and "linuxcnclcd" out there?

On 05/13/2016 07:25 AM, Eric H. Johnson wrote: > Sebastian, > > I have some catching up to do. I do not think I have done a commit since > switching from VNC to git, and have not setup the development environment > since switching back to Debian. I still run production headless on Xubuntu. > I am

Re: [Emc-users] Any users of "xlinuxcnc" and "linuxcnclcd" out there?

Sebastian, I have some catching up to do. I do not think I have done a commit since switching from VNC to git, and have not setup the development environment since switching back to Debian. I still run production headless on Xubuntu. I am currently out of town but will look at it next week after

Re: [Emc-users] hal edm (User interface)

I got measurement for EDM generator voltage an current into linuxcnc but do now where to put them. User interface need to be modified. As is now there is now in motion module there is motion.spindle while motion.edm is needed, any ideas? On Mon, 9 May 2016 11:49:06 +0800 Thomas Powderly

Re: [Emc-users] CAD/CAM for LinuxCNC

it is on github.com/jethornton JT On 5/12/2016 9:13 PM, Gene Heskett wrote: > On Thursday 12 May 2016 18:57:36 John Thornton wrote: > >> I need to update the files on my web site. Like everything else I >> share well almost everything. >> >> JT >> >> On 5/12/2016 1:11 PM, Gene Heskett wrote:

Re: [Emc-users] CAD/CAM for LinuxCNC

I found the latest version but need to get golang set up on this new install. I'll try and get it all sorted out this weekend. JT On 5/12/2016 9:13 PM, Gene Heskett wrote: > On Thursday 12 May 2016 18:57:36 John Thornton wrote: > >> I need to update the files on my web site. Like everything