Re: [Emc-users] Fanuc A06B-6058-H322 Servo Amp Part Number

On 12/19/2016 01:35 PM, Steve from Tube Gauge wrote: > On Sat, 17 Dec 2016 15:56:13 -0600 Jon Elson wrote: > > "Depending on the size of the motors, it may be possible to > run the machine with the Pico Systems brushless PWM servo > amp, it is good for up to 20 A peak. If you have the model >

Re: [Emc-users] EDM machining, user interface

Nicklas congratualtions of course I would test I am off this morning for a week but would look at the new year Merry Christmas & Happy New Year to you & all the developers of Linuxcnc tomp tjtr33 On 12/20/16 03:11, Nicklas Karlsson wrote: > Finally I have all the necessary hardware parts, some

Re: [Emc-users] I think its time to issue a warning about sandisk 32GB supposedly 2x speed of a samsung sd card

On 12/20/2016 01:10 AM, Gene Heskett wrote: > What has been other raspi users experience? Is a sandisk crap? For the small SD cards (<8G) it seems to work most of the time. I have only seen few problems, but have not been able to pin it down on one manufacturer. The large ones (16+) can be a

[Emc-users] I think its time to issue a warning about sandisk 32GB supposedly 2x speed of a samsung sd card

Greetings all; I bought one of them because the speed rating on the car said up to 85megs/second. But,,, dd, writing the full jessie image, shows in the very immediate range of 15,8-16.2 megs for writing speed on either media. And I had to write it twice before it would boot. Then today as I

Re: [Emc-users] Absolute encoders

On 19 December 2016 at 21:18, hubert wrote: > It looked interesting until I translated the model #. To me it looks > like it is 512 counts per turn for 8 turns. No where near the implied > 4096 counts for up to 4096 turns. I think you are right. Sorry chaps. -- atp "A

Re: [Emc-users] LinuxCNC on Xenomai kernel (amd64)

> On Mon, Dec 19, 2016 at 09:15:39PM +0100, Nicklas Karlsson wrote: > > There is --enable-simulator --with-realtime=uspace but I think other option > > could be chosen to. > > There is also --with-realtime=PATH > > > > It is ./configure --help in the src directory not ./config -h > > Thanks for

Re: [Emc-users] Absolute encoders

It looked interesting until I translated the model #. To me it looks like it is 512 counts per turn for 8 turns. No where near the implied 4096 counts for up to 4096 turns. Hubert On 12/19/16 11:30 AM, andy pugh wrote: > These look like something of a bargain: >

Re: [Emc-users] LinuxCNC on Xenomai kernel (amd64)

On Mon, Dec 19, 2016 at 09:15:39PM +0100, Nicklas Karlsson wrote: > There is --enable-simulator --with-realtime=uspace but I think other option > could be chosen to. > There is also --with-realtime=PATH > > It is ./configure --help in the src directory not ./config -h Thanks for replay It is

Re: [Emc-users] LinuxCNC on Xenomai kernel (amd64)

There is --enable-simulator --with-realtime=uspace but I think other option could be chosen to. There is also --with-realtime=PATH It is ./configure --help in the src directory not ./config -h On Mon, 19 Dec 2016 19:35:49 + andy pugh wrote: > On 19 December 2016 at

[Emc-users] EDM machining, user interface

Finally I have all the necessary hardware parts, some are still on desktop not connected to machine but they are tested to work: servo drives, digital IO, spark generator. Right now I start to think about user interface and as I remember someone started work on this earlier. If anyone is

Re: [Emc-users] LinuxCNC on Xenomai kernel (amd64)

On 19 December 2016 at 19:03, Dino Del Favero wrote: > LinuxCNC got from git (linuxcnc-dev) configured and compiled OK, What settings did you use at the config stage? ./config -h for the list of options. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is

[Emc-users] Fanuc A06B-6058-H322 Servo Amp Part Number

On Sat, 17 Dec 2016 15:56:13 -0600 Jon Elson wrote:   "Depending on the size of the motors, it may be possible to  run the machine with the Pico Systems brushless PWM servo  amp, it is good for up to 20 A peak. If you have the model  of the motor, I can look that up."       The motor "TYPE" is

Re: [Emc-users] LinuxCNC on Xenomai kernel (amd64)

I can vaguely rember someting about running in user space or RT something, it have to be decided then compiling, if you search you would probably find. On Mon, 19 Dec 2016 20:03:24 +0100 Dino Del Favero wrote: > Dear all, > I am trying to compile LinuxCNC for using it on

[Emc-users] LinuxCNC on Xenomai kernel (amd64)

Dear all, I am trying to compile LinuxCNC for using it on kernel patched with Xenomai. I have successfully builded linux kernel patched with Xenomai on an AMD64: - linux-3.18.20 - Xenomai-2.6.5 RT work correctly and Xenomai tests pass. LinuxCNC got from git (linuxcnc-dev) configured and compiled

[Emc-users] Absolute encoders

These look like something of a bargain: http://www.ebay.com/itm/New-BEI-Absolute-Multi-turn-Encoders-HMT25-Gray-Code-/261822092613?hash=item3cf5d01545:g:o~EAAOSw-7RVEBEQ $100 each. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical

Re: [Emc-users] Fanuc A06B-6058-H322 Servo Amp Part Number

On 19 December 2016 at 15:49, Gene Heskett wrote: > > Worthless as a spindle control if there are v belts between the motor and > the encoder. Yes, It is for commutating motors, nothing more and nothing less. -- atp "A motorcycle is a bicycle with a pandemonium attachment

Re: [Emc-users] Fanuc A06B-6058-H322 Servo Amp Part Number

On Monday 19 December 2016 04:33:49 andy pugh wrote: > On 19 December 2016 at 03:33, Gene Heskett wrote: > > But I have neither the module, nor that manpage. ISTR we had > > something like that in older releases? But the *_hall3 manpage says > > it was created 2 weeks

Re: [Emc-users] Fanuc A06B-6058-H322 Servo Amp Part Number

On 19 December 2016 at 03:33, Gene Heskett wrote: > But I have neither the module, nor that manpage. ISTR we had something > like that in older releases? But the *_hall3 manpage says it was > created 2 weeks ago. the "bldc" module can do all that bldc_hall3 can do, and is