On 2020-02-02 17:00, Jon Elson wrote:
On 02/02/2020 05:04 PM, Thomas D. Dean wrote:
On 2020-02-01 20:46, Jon Elson wrote:
On 02/01/2020 08:35 PM, Thomas D. Dean wrote:
I have been using linuxcnc 2.9.0~Pre0 from sources, run in place.
Until today, it has worked, mostly. Before today, about
On 2020-02-02 22:06, N wrote:
Pretty sure I use buster on several machines.
You use linuxcnc with buster?
Tom Dean
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
> On 2020-02-01 20:46, Jon Elson wrote:
> > On 02/01/2020 08:35 PM, Thomas D. Dean wrote:
> >> I have been using linuxcnc 2.9.0~Pre0 from sources, run in place.
> >> Until today, it has worked, mostly. Before today, about 2x per week
> >> it would freeze and I had to cycle power to get it
> ...
> The EMC(squared) corporation threatened to sue over anything
> that used "EMC" in it,
> and so the name had to be changed. LinuxCNC is totally the
> continued development
> of EMC2, just under a different name.
>
> Jon
Also avoid confusion with Electro Magnetic Compability (EMC) which
On 2020-02-02 17:02, Jon Elson wrote:
On 02/02/2020 06:32 PM, Sebastian Kuzminsky wrote:
So the problem started right after you upgraded to the new RTAI kernel?
That's where I'd look for a problem first.
Ohhh! I NEVER, EVER, update the kernel on a LinuxCNC system. In
fact, I NEVER
On 02/02/2020 06:32 PM, Sebastian Kuzminsky wrote:
So the problem started right after you upgraded to the new
RTAI kernel?
That's where I'd look for a problem first.
Ohhh! I NEVER, EVER, update the kernel on a LinuxCNC
system. In fact, I NEVER update the kernel on
ANY Linux system
On 02/02/2020 05:04 PM, Thomas D. Dean wrote:
On 2020-02-01 20:46, Jon Elson wrote:
On 02/01/2020 08:35 PM, Thomas D. Dean wrote:
I have been using linuxcnc 2.9.0~Pre0 from sources, run
in place. Until today, it has worked, mostly. Before
today, about 2x per week it would freeze and I had
On Fri, 31 Jan 2020 at 19:50, dave engvall wrote:
> so I grabbed a new disc and installed stretch ... iso.
> Looks pretty, comes up nicely.
>
> However invoking linuxcnc only brings up the ---sim stuff. I can get at
> other stuff thru by-interface but in frustration manually copied the
>
On 02/02/2020 02:34 PM, Gene Heskett wrote:
On Sunday 02 February 2020 14:14:16 Rafael Skodlar wrote:
EMC (Enhanced Machine Control) seems to have fizzled out.
No it hasn't, but the other emc objected to the name so it was changed to
LinuxCNC, several years ago, and it sure as hell hasn't
On 2/1/20 10:23 PM, Thomas D. Dean wrote:
On 2020-02-01 20:46, Jon Elson wrote:
On 02/01/2020 08:35 PM, Thomas D. Dean wrote:
I have been using linuxcnc 2.9.0~Pre0 from sources, run in place.
Until today, it has worked, mostly. Before today, about 2x per week
it would freeze and I had to
On 2020-02-01 20:46, Jon Elson wrote:
On 02/01/2020 08:35 PM, Thomas D. Dean wrote:
I have been using linuxcnc 2.9.0~Pre0 from sources, run in place.
Until today, it has worked, mostly. Before today, about 2x per week
it would freeze and I had to cycle power to get it working. Now,
On Sunday 02 February 2020 14:14:16 Rafael Skodlar wrote:
> On 2020-01-29 09:35, Stuart Stevenson wrote:
> > On Wed, Jan 29, 2020 at 3:34 AM Les Newell
> > wrote:
>
> ... snip
>
> > Another story
> > In 1997 I purchased a 5 axis license from OpenCNC (MDSI2). OpenCNC
> > (closed source) ran on
On 2020-01-29 09:35, Stuart Stevenson wrote:
On Wed, Jan 29, 2020 at 3:34 AM Les Newell
wrote:
... snip
Another story
In 1997 I purchased a 5 axis license from OpenCNC (MDSI2). OpenCNC (closed
source) ran on QNX RTOS (closed source) using hardware from a list of . The
Open meant OpenCNC
13 matches
Mail list logo
