I have to move a small electric press and at the same time an electric
translator. I can't put everything in a gcode because the movements are not
correlated the translator does only back and forth so simple_tp
could be for me. The problem is that if I launch an MDI for the press
(axis0)
The pinout is determined by the firmware so many
parallel port type 7I92 bitfiles will do
Does this mean that say stepgen 0 is tied to pin 2 and 3 (on db25) and
so on?
How do I get my pin number allocation as I set it out below. I seem to
not be able dictate how the stepgens are assigned
On Tue, 12 Apr 2022, Marius wrote:
Date: Tue, 12 Apr 2022 16:22:37 +0200
From: Marius
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Looking for 7i92 bit file
I attached a picture. Don't remember if that can be done.
This
I attached a picture. Don't remember if that can be done.
This is the config I need but I will be damned if I can get PnCConf to
do this. Maybe I dont understand the GUI where the pin allocations
happen that well. If only they would show the I/O number correctly
somewhere. There are some
On Tue, 12 Apr 2022 at 13:48, Marius wrote:
> The config I have to replicate is this.
Seems to be coming through blank.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch,
Hi
I am looking for a bit file for the 7i92e that will replicate the
parallel port to suit a standard BOB. In particular the Greg Paxton BOB.
The config I have to replicate is this.
Motor pin allocations
Regards
Marius
___
Emc-users mailing