On 1/31/23 11:09, Alan Condit wrote:
I installed 2.9pre on two of my Raspberry Pi4s from debs that I had
compiled earlier. However, I can’t find my write up on how to cross-compile
LinuxCNC for the RPi4 on my X86-64. Also, I found that the compile on the
RaspberryPi4 with a 240gb SSD runs almost
I installed 2.9pre on two of my Raspberry Pi4s from debs that I had
compiled earlier. However, I can’t find my write up on how to cross-compile
LinuxCNC for the RPi4 on my X86-64. Also, I found that the compile on the
RaspberryPi4 with a 240gb SSD runs almost as fast, or maybe a little
faster, as
I would certainly go back into testing mode if Rob merged the TP changes..
:) That is stuff you can setup and let run..
sam
On Tue, Jan 31, 2023 at 7:05 AM andy pugh wrote:
> On Mon, 30 Jan 2023 at 11:16, Rick Moscoloni wrote:
> >
> > Hi Andy, could this be merged to master? or are
On Mon, 30 Jan 2023 at 11:16, Rick Moscoloni wrote:
>
> Hi Andy, could this be merged to master? or are proprietary?
It has been offered to us, but it doesn't merge cleanly as it predates
the Joints-Axes changes.
Rob Ellenberg said, (April 2021)
There has been some divergence in the TP but not