Opens OK in Freecad 0.19 on my MAC.
Dr. Andreas O. Lindner
Lindner TAC
Auhofstraße 11 B / 11
1130 Wien
Austria
Fax: +43 1 877 68 73
Mobil: +43 664 41 24 742
Email: a.lind...@lindner-tac.at
Web: http://www.lindner-tac.at
> Am 13.10.2021 um 10:31 schrieb Gene Heskett :
>
> On Wed
Sorry to say, but here you missed something. A motion-controller is needed in
addition. They mention something like grbl 1.1, ….
LCNC is all that together and can do a lot more. This seams to be some fancy
pendent for grbl.
just my 2 cts.
Andreas O. Lindner
Lindner TAC
> Am 13.06.2021 um
Hello Dave,
I never had any luck with dd on the original images, I always used the rip
tools.
Andreas
> Am 07.04.2021 um 17:52 schrieb Eric Keller :
>
> Dave,
> It sure sounds like you are failing at the first step, you shouldn't have
> to dd, and it's probably not going to work. You don't
Hello Gene,
this looks a lot like massive under extrusion. This can come from clogged nosel
or wrong filament diameter
Best regards,
Andreas
Andreas O. Lindner
Lindner TAC
Auhofstraße 11 B / 11
1130 Wien
Austria
Fax: +43 1 877 68 73
Mobil: +43 664 41 24 742
Email: a.lind...@lindner-tac.at
Hi,
just to make sure, have you checked if your BOB has open collector outputs. If
so you need to supply a pull-up resistor between output and +5V and the output
needs to be defined inverted.
Br, Andreas
Dr. Andreas O. Lindner
Lindner TAC
Auhofstraße 11 B / 11
1130 Wien
Austria
Fax: +43 1
Hello, green-yellow is protected ground only in central Europe. In US it is a
bare wire !
Just my 2 cents,
Andreas
> Am 20.01.2020 um 18:48 schrieb Peter Blodow :
>
> Isn't there something written on the green-yellow wire? In any case: don't
> connect any power to this wire, its PROTECTIVE