Amazing!Sent from my Samsung S10
Original message From: Sam Sokolik Date:
2023-04-20 10:25 a.m. (GMT-08:00) To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] An actual
application for non-circular boring.. the corners are what the boring
produced
t; -Original Message-
> > From: Sam Sokolik [mailto:samco...@gmail.com]
> > Sent: April-20-23 9:28 AM
> > To: Enhanced Machine Controller (EMC)
> > Subject: Re: [Emc-users] An actual application for non-circular boring..
> >
> > I did it on the mill..
> >
>
troller (EMC)
> Subject: Re: [Emc-users] An actual application for non-circular boring..
>
> I did it on the mill..
>
> (this was testing)
> https://www.youtube.com/shorts/23bEsKMNJH0
>
> On Thu, Apr 20, 2023 at 11:08?AM John Dammeyer
> wrote:
>
> > So it was bore
samco...@gmail.com]
> > Sent: April-20-23 5:03 AM
> > To: Enhanced Machine Controller (EMC)
> > Subject: Re: [Emc-users] An actual application for non-circular boring..
> >
> > Sure - Maybe if it was made out of steel - the area is so tight that
> there
> > isn't
So it was bored on the lathe using your spindle tracked motion?
> -Original Message-
> From: Sam Sokolik [mailto:samco...@gmail.com]
> Sent: April-20-23 5:03 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] An actual application for non-circular bor
Sure - Maybe if it was made out of steel - the area is so tight that there
isn't much room around the ball nut.
The green machine that I am using to cut this has just what you say.
(obviously a lot more room)
https://electronicsam.com/images/greenmachine/20180903_154610.jpg
But what fun would th
On Thu, 20 Apr 2023 at 02:21, Sam Sokolik wrote:
>
> https://photos.app.goo.gl/uqdkdMuDpp8oACy3A
That's really nice, though I think it might have worked just as well with
the bottom open and a circular bore?
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed
for t
raight edge.
>>>
>>> What G-Code was used so the boring tool stayed synchronized.
>>>
>>> Curious minds wish to know...
>>> John
>>>
>>> > -Original Message-
>>> > From: Sam Sokolik [mailto:samco...@gmail.com
aight edge.
>>
>> What G-Code was used so the boring tool stayed synchronized.
>>
>> Curious minds wish to know...
>> John
>>
>> > -Original Message-----
>> > From: Sam Sokolik [mailto:samco...@gmail.com]
>> > Sent: March-12-23 8:1
ailto:samco...@gmail.com]
> > Sent: March-12-23 8:13 AM
> > To: Enhanced Machine Controller (EMC)
> > Subject: [Emc-users] An actual application for non-circular boring..
> >
> > When all you have is a hammer
> >
> > https://www.youtube.com/watch?v=qMLz4kWoAE
m: Sam Sokolik [mailto:samco...@gmail.com]
> Sent: March-12-23 8:13 AM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] An actual application for non-circular boring..
>
> When all you have is a hammer
>
> https://www.youtube.com/w
No!! it is mainly so it is as strong as I can make it in such a small
spot..
sam
On Sun, Mar 12, 2023 at 11:51 AM andy pugh wrote:
> On Sun, 12 Mar 2023 at 15:17, Sam Sokolik wrote:
>
> > When all you have is a hammer
> >
>
> Cool, though the part would almost certainly work just fin
It is a 800? Watt brushless servo belt driven. It is being run by a stmbl
drive. It isn't running position mode - the encoder that linuxcnc used for
spindle synced motion is mounted on the spindle.
On Sun, Mar 12, 2023, 11:14 AM Rob C wrote:
> Nice!
>
> what is your spindle?
>
> servo motor wi
On Sun, 12 Mar 2023 at 15:17, Sam Sokolik wrote:
> When all you have is a hammer
>
Cool, though the part would almost certainly work just fine with an open
bottom...
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses,
Nice!
what is your spindle?
servo motor with encoder?
On Sun, 12 Mar 2023 at 15:17, Sam Sokolik wrote:
> When all you have is a hammer
>
> https://www.youtube.com/watch?v=qMLz4kWoAEI
>
> sam
>
> ___
> Emc-users mailing list
> Emc-users@lists.sour
When all you have is a hammer
https://www.youtube.com/watch?v=qMLz4kWoAEI
sam
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
16 matches
Mail list logo
