I think I've seen this same file-loading issue when using the python
interface. The program_open python command loads a G-code program, but
the GUI doesn't reflect the change by reloading the live plot or the G code
display. Looking into the axis.py script, the open_file_guts function at
line 1040
On 2/9/14 09:59 , Christopher Purcell wrote:
In recent tests, I connect to a running LinuxCNC 2.5.3 process (Axis 2.5.3
gui) with linuxcncrsh and nc. If I open an ngc file using linuxcncrsh
commands like:
...
set mode auto
set open file.ngc
...
then the running Axis process shows that a
In recent tests, I connect to a running LinuxCNC 2.5.3 process (Axis 2.5.3 gui)
with linuxcncrsh and nc. If I open an ngc file using linuxcncrsh commands like:
...
set mode auto
set open file.ngc
...
then the running Axis process shows that a new file has been loaded by a change
in its banner,
Christopher Purcell christopherpurcell@... writes:
In recent tests, I connect to a running LinuxCNC 2.5.3 process (Axis 2.5.3
gui) with linuxcncrsh and nc. If I
open an ngc file using linuxcncrsh commands like:
...
set mode auto
set open file.ngc
...
then the running Axis process shows
Mike, the only green button on Axis 2.5.3 that I can find is the Reopen
current file (Control-R) button. In the situation I describe, where
linuxcncrsh has opened the file, clicking this button reloads the previous
model, not the one just loaded remotely.
PS. my disappearing posts to the
