On 04/10/2012 09:48 PM, Kent A. Reed wrote:
Most likely this is correct, Dave, but it sure looks like Kirk is
proposing to experiment on the drive to determine its characteristics.
Were I to try this, my wife would give me a squinty-eyed look, possibly
snort (although she usually saves this
On Wednesday, April 11, 2012 11:10:35 AM Mark Wendt did opine:
On 04/10/2012 09:48 PM, Kent A. Reed wrote:
Most likely this is correct, Dave, but it sure looks like Kirk is
proposing to experiment on the drive to determine its characteristics.
Were I to try this, my wife would give me a
On 04/11/2012 11:12 AM, gene heskett wrote:
Kent,
The good news, in this day and age, is you can snort right back and say
Men don't need to ask for directions. Our phones have GPS. ;-)
Mark
Yours might. Mine doesn't, so I have a Garmin. The woof gets upset with
me when I tell
Kirk Wallace kwallace@... writes:
On Tue, 2012-04-10 at 11:25 -0400, Dave wrote:
On 4/10/2012 11:11 AM, gene heskett wrote:
there is no source
of power on that side of the interface in the G540
...
practical with the existing design. I was thinking that some simple
pull
On 4/10/2012 5:52 PM, Kent A. Reed wrote:
Kirk Wallacekwallace@... writes:
On Tue, 2012-04-10 at 11:25 -0400, Dave wrote:
On 4/10/2012 11:11 AM, gene heskett wrote:
there is no source
of power on that side of the interface in the G540
...
On 4/10/2012 9:35 PM, Dave wrote:
On 4/10/2012 5:52 PM, Kent A. Reed wrote:
Kirk Wallacekwallace@... writes:
...
Dan from the DIY-CNC list has loaned a G540 to me (it might be here
Wed.). I plan to investigate this pull-up issue and document it, maybe
on the wiki. One of my hopes is to
On 4/10/2012 9:48 PM, Kent A. Reed wrote:
On 4/10/2012 9:35 PM, Dave wrote:
On 4/10/2012 5:52 PM, Kent A. Reed wrote:
Kirk Wallacekwallace@...writes:
...
Dan from the DIY-CNC list has loaned a G540 to me (it might be here
Wed.). I plan to investigate this pull-up
