Hi Bari
take it over to Heid in Schaumburg,
They can identify it.
Most of those rotaries were from 3R Caxis,
and HandRadsm
we used distance coded linears for XYZ,
and the older rotaries were 11uA
I doubt its a newer 1v pp
All were sinus, none were digital.
Sorry, some of my techs were
I always end up with the odd ones that have no match. No packaged IC's
on the other side of the board either.
The colors used on this are 3 that are White and one each of Brown, Red,
Yellow, Green and Blue. None have a stripe.
On 11/28/21 02:53, Les Newell wrote:
Take a look at this pdf,
Take a look at this pdf, page 87
<,https://www.heidenhain.us/wp-content/uploads/349529-2H_Rotary_Encoders_en.pdf>.
If it's an incremental encoder, that's probably the correct pinout.
Les
On 28/11/2021 06:07, Bari wrote:
Found this encoder in a box with the cable snipped off. I haven't
found
Found this encoder in a box with the cable snipped off. I haven't found
a signal pinout for the 12 pin connector inside. Anyone have one or know
where to find one?
Part number is missing for the encoder.
https://imgur.com/T9TIH8Z
Thanks in advance.
